Connecting A Scanner; Starting The Wearable Terminal - Motorola WT4000 - Wearable Terminal - Win CE 5.0 Professional 520 MHz User Manual

1 - 10 WT4070/90 Wearable Terminal User Guide

Connecting a Scanner

The RS309 and RS409 scanners can be used with the wearable terminal. Refer to RS309 Scanner on page 3-10
and RS409 Scanner on page 3-8 for procedures for connecting the scanner to the wearable terminal.

Starting the Wearable Terminal

Press the Power button to turn on the wearable terminal. If the wearable terminal does not power on, perform a
cold boot. See Resetting the Wearable Terminal on page
NOTE When a battery is fully inserted in a wearable terminal for the first time, upon the wearable terminal's first
power up, the device cold boots and powers on automatically.
When the wearable terminal is powered on the splash screen
followed by the Start Up window on non-touch configurations and the calibration screen on touch enabled
configurations.
Splash Screen
Figure 1-10
OEM VERSION 02.17.0001
Start Up Window
Figure 1-11
Use the
Calibration
Carefully press and briefly hold on the center of the
1.
target moves and stops at different locations on the screen. This enters the new calibration settings.
OEM VERSION 03.17.0001
screen to align the touch screen:
2-16.
(Figure 1-10) appears for a short period of time
OEM VERSION 04.20.0004 or
screen target. Repeat the procedure as the
Calibration
05.30.0001