Motorola WT4000 - Wearable Terminal - Win CE 5.0 Professional 520 MHz User Manual page 73

Troubleshooting the Wearable Terminal (Continued)
Table 4-1
Problem
During data Wearable terminal
communication, no removed from
data was transmitted, cradle or unplugged
or transmitted data from host computer
was incomplete. during
communication.
Incorrect cable
configuration.
Communication
software was
incorrectly installed
or configured.
No sound is audible. Volume setting is
low or turned off.
Wearable terminal Wearable terminal
turns itself off. is inactive.
Battery is depleted.
Battery is not
inserted properly.
The wearable
terminal's battery is
low and it powers
down to protect
memory content.
A message appears Too many files
stating that the stored on the
wearable terminal wearable terminal.
memory is full.
Too many
applications
installed on the
wearable terminal.
Cause
Replace the wearable terminal in the cradle, or reattach the
Synchronization cable and re-transmit.
See the System Administrator.
Perform setup. Refer to the WT4090 Integrator Guide for
details.
Ensure that Microsoft ActiveSync 4.1 or greater is installed on
the host computer.
Adjust volume. Change volume settings by selecting
>
Settings Control Panel
Move the slider to change the volume level.
The wearable terminal turns off after a period of inactivity. If the
wearable terminal is running on battery power, this period can
be set to 30 sec., 1, 2, 3, 4, 5 or 6 minutes. If the wearable
terminal is running on external power, this period can be set to
1, 2, 3, 5, 10, 15 and 30 minutes.
Check the power settings by selecting
Control Panel
Change the setting if you need a longer delay before the
automatic shutoff feature activates.
Replace the battery.
Insert the battery properly (see Installing and Removing the
Main Battery on page 1-5).
Recharge the battery.
Delete unused memos and records. You can save these
records on the host computer.
If you have installed additional applications on the wearable
terminal, remove them to recover memory.
Select
Start
icon.
Select the unused program and select Remove.
Maintenance & Troubleshooting
Solution
>
Volume & Sounds
Start
> icon >
Power Power Off
> >
Settings Control Panel
4 - 7
>
Start
icon > tab.
Volume
> >
Settings
tab.
>
Remove Programs