Download Print this page

Motorola VT1000 User Manual: Connecting A Computer To Display The Configuration Pages

Motorola user guide voice terminal vt1000 series.
Hide thumbs

Advertisement

18

Connecting a Computer to Display the Configuration Pages

For a
Network Installation With Calls Not Prioritized
computer with DHCP enabled to the Motorola voice terminal to display the configuration
pages. For information about enabling DHCP, refer to your operating system
documentation.
If you performed an
Installation With A Single Computer
Calls
Prioritized, a computer is already connected to the Motorola voice terminal.
To connect a computer to the back of the Motorola voice terminal:
1
Connect one end of an Ethernet cable to the PC connector on the Motorola voice
terminal.
2
Connect the other end of the Ethernet cable to the Ethernet connector on a
computer.
3
Power up the computer.
only, you need to connect a
or a
Network Installation With

Advertisement

   Related Manuals for Motorola VT1000

This manual also for:

Vt1003, Vt1005, Vt1003v, Vt1005v

Comments to this Manuals

Symbols: 0
Latest comments: