Charging Spare Batteries; Removing The Main Battery - Motorola WT4000 - Wearable Terminal - Win CE 5.0 Professional 520 MHz User Manual

Charging Spare Batteries

Use the following accessories to charge spare batteries:
•
Single Slot USB Cradle
•
Four Slot Spare Battery Charger.
To charge a spare battery:
Ensure the accessory used to charge the spare battery is connected to the appropriate power source.
1.
Insert the spare battery into the accessory's spare battery charging slot with the charging contacts facing down
2.
(over the charging pins) and gently press down on the battery to ensure proper contact.
The battery starts to charge automatically. The amber charge LED on the accessory lights to show the charge
3.
status. See Chapter 3, Accessories
The standard capacity battery fully charges in less than four hours and the extended capacity battery fully charges
in less than eight hours.

Removing the Main Battery

To remove the main battery:
Prior to removing the battery, ensure that the wearable terminal is in suspend mode. If the wearable terminal is
1.
not in suspend mode, press the Power button to place the wearable terminal in suspend mode.
Press the battery release button. The battery partially ejects from the wearable terminal.
2.
Remove the battery from the wearable terminal.
3.
Removing the Main Battery
Figure 1-5
for accessory charge LED indicator definitions.
Battery Release
Getting Started 1 - 7