Amazone Cenio 5000-2 Original Operating Manual
  1. Manuals
  2. Brands
  3. Amazone Manuals
  4. Tiller
  5. Cenio 4000-2
  6. Original operating manual
Amazone Cenio 5000-2 Original Operating Manual

Amazone Cenio 5000-2 Original Operating Manual

Mounted cultivator
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Original operating manual
Mounted cultivator
Cenio 4000-2
Cenio 5000-2
SmartLearning
www.amazone.de

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Cenio 5000-2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Amazone Cenio 5000-2

Summary of Contents for Amazone Cenio 5000-2

  • Page 1 Original operating manual Mounted cultivator Cenio 4000-2 Cenio 5000-2 SmartLearning www.amazone.de...
  • Page 2 Please enter the identification data of the implement. The identification data can be found on the rating plate.

  • Page 3: Table Of Contents

    Layout of the warning symbols 6.2.4 Coupling the hydraulic hose lines 4.4.3 Description of the warning symbols 6.2.5 Coupling the lighting for road travel Lighting and identification for road travel 6.2.6 Coupling the three-point mounting frame MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...
  • Page 4 Moving the jacks into parking position 11 Loading the implement Uncoupling the three-point 11.1 Loading the implement with a mounting frame crane Driving the tractor away from the implement Uncoupling the lighting for road travel MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...
  • Page 5 TABLE OF CONTENTS 11.2 Lashing the implement 12 Disposing of the implement 13 Appendix 13.1 Bolt tightening torques 13.2 Other applicable documents 14 Directories 14.1 Glossary 14.2 Index MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 7: About This Operating Manual

    WARNING Indicates a possible threat with moderate risk for severe physical injury or death. CAUTION Indicates a threat with low risk for light or moderately severe physical injuries. MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 8: Further Instructions

    Example: 1. Instruction 1 2. Instruction 2 1.2.3.2 Instructions and responses CMS-T-005678-B.1 Reactions to instructions are marked with an arrow. Example: 1. Instruction 1 Reaction to instruction 1 2. Instruction 2 MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...
  • Page 9 CMS-T-00013932-B.1 WORKSHOP WORK Identifies maintenance work that must be performed at a workshop that is adequately equipped in terms of agricultural technology, safety and environmental technology by specialist personnel with appropriate training. MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 10: Lists

    Your suggestions for improvement help us to Technische Redaktion create ever more user-friendly documents. Please Postfach 51 send us your suggestions by post, fax or email. D-49202 Hasbergen Fax: +49 (0) 5405 501-234 E-Mail: tr.feedback@amazone.de CMS-I-00000638 MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 11: Safety And Responsibility

    2.1.2.1.1 Requirements for persons working with the implement CMS-T-00002310-C.1 If the implement is used improperly, people can be injured or killed: To prevent accidents due to improper use, every person who works with MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...
  • Page 12 Farmers are basically familiar with working with agricultural implements and can instruct agricultural helpers in how to use the implements if necessary. They can perform odd tasks and simple maintenance and repair work on agricultural implements themselves. MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...
  • Page 13 Passengers can fall, be run over and severely injured or killed due to machine movements. Ejected objects can hit and injure passengers. Do not let anybody ride on the machine. Do not let anybody climb onto the driving machine. MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...
  • Page 14 Non-observance of the technical limits values of the machine can result in accidents and serious personal injury or even death. Moreover, the machine can be damaged. The technical limit values can be found in the Technical Data. Comply with the technical limit values. MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...
  • Page 15 Missing warning symbols increase the risk of serious and lethal personal injury. Clean dirty warning symbols. Immediately replace any damaged and illegible warning symbols. Put the intended warning symbols on spare parts. MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 16: Knowing And Preventing Dangers

    If the universal joint shaft is angled down too strongly: Switch off the universal joint shaft drive. If you do not need the universal joint shaft: Switch off the universal joint shaft drive. MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...
  • Page 17 When the drives are switched off, machine parts can continue running and cause serious personal injury or death. Before approaching the machine, wait until any machine parts that are still running have come to a stop. Only touch machine parts that are standing still. MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...
  • Page 18 If people enter the danger area, CMS-I-001131 immediately switch off the engines and drives. Before you work in the danger area of the implement, secure the tractor and implement. This also applies for quick checking work. MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 19: Safe Operation And Handling Of The Machine

    Use only suitable tractors for coupling and transporting the implement. When the implement is coupled onto the tractor, make sure that the tractor's connecting device meets the implement requirements. Couple the implement properly to the tractor. MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...
  • Page 20 Use the warning beacon in compliance with the national regulations. Switch off the work lights. Lock the tractor control units. Follow the instructions in the section "Preparing the implement for road travel". MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 21: Safe Maintenance And Modification

    To ensure that the operating permit remains valid in accordance with national and international regulations, ensure that the specialist workshop only uses conversion parts, spare parts and special equipment approved by AMAZONE. MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...
  • Page 22 Remove the ignition key and carry it with you. Wait until all parts that are still running come to a stop and until hot parts cool down. Do not stand on moving parts. MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...
  • Page 23 Never modify safety-related components. Never drill out existing holes. Perform all maintenance work at the prescribed maintenance intervals. MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...
  • Page 24 2.1.5.3 Operating materials CMS-T-00002324-C.1 Unsuitable operating materials Operating materials that do not meet AMAZONE requirements can cause implement damage and accidents. Only use operating material that meet the requirements in the Technical Data. MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 25: Safety Routines

    CMS-T-00002325-B.1 Special equipment, accessories, and spare parts Special equipment, accessories, and spare parts that do not meet AMAZONE requirements can impede the operational safety of the implement and cause accidents. Only use original parts or parts that meet AMAZONE requirements.
  • Page 26 2 hands and one foot or 2 feet and one hand on the implement. When climbing up and down, never hold onto the control elements. When climbing down, never jump off of the implement. MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 27: Intended Use

    AMAZONE. Uses other than those specified under the intended use are considered as improper. The manufacturer is not liable for any damage resulting from improper use, solely the operator is responsible. MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 28: Product Description

    10 Compression spring overload safety or shear Levelling bolt overload safety 11 Tine with coulter 12 Hydraulic working depth adjustment of the coulters 13 Hydraulically folding sections 14 Threaded cartridge MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 29: Function Of The Implement

    The sales documents provide information on the equipment of your implement, or consult your dealer for more detailed information. The following equipment is considered special equipment: Lighting and identification for road travel MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 30: Warning Symbols

    4.4 Warning symbols CMS-T-00015664-C.1 4.4.1 Positions of the warning symbols CMS-T-00015666-C.1 MD100 MD100 MD100 MD78 MD100 MD155 MD078 MD095 MD102 MD199 MD155 MD096 MD272 MD217 CMS-I-00010389 MD273 MD273 MD155 MD155 MD155 MD155 CMS-I-00010391 MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 31: Layout Of The Warning Symbols

    Wait until all moving parts are at a standstill before reaching into the danger area. Make sure that there is nobody standing in the CMS-I-000074 danger area or close to the moving parts. MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...
  • Page 32 If you are injured by hydraulic oil, consult a doctor immediately. CMS-I-000216 MD 100 Risk of accidents due to improperly attached lifting gear Only attach the lifting gear at the marked positions. CMS-I-000089 MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...
  • Page 33 CMS-I-00003657 MD 155 Risk of accident and machine damage during transport due to improperly secured machine Only attach the lashing belts at the marked lashing positions for transporting the machine. CMS-I-00000450 MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...
  • Page 34 Before you actuate the tractor hydraulic system, instruct persons away from the area between the tractor and the implement. Actuate the tractor hydraulic system only from the designated work station. MD272 CMS-I-00005276 MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 35: Lighting And Identification For Road Travel

    Rear lights, brake lights, and turn indicators Yellow reflectors Warning sign Orange fluorescent warning sticker for implement width > 3.6 m Red reflecting warning sticker Yellow reflecting warning sticker Identification panel for slow-driving vehicles MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 36: Front Lighting And Identification For Road Travel

    4.5.3 Additional license plate CMS-T-00003999-C.1 Licence plate lighting Licence plate holder CMS-I-00003163 4.6 Rating plate on the implement CMS-T-00004505-L.1 Serial number Vehicle ID number Product Permissible technical implement weight Model year Year of manufacture MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 37: Other Information On The Implement

    50h...50h...50h... 120NM ME1833 CMS-I-00010476 4.8 Threaded cartridge CMS-T-00001776-F.1 The threaded cartridge contains documents and, depending on the implement equipment, other aids. MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 38: Soil Tillage Tools

    The compression spring allows the tine to deflect in overload situations. CMS-I-00003022 4.9.1.2 Tines with shear bolt overload safety CMS-T-00004483-A.1 In the event of an overload, the shear bolt 1 shears off. CMS-I-00003021 MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 39: Coulters

    8 cm foot coulter tip 4 cm Figure Coulter width 8 cm 32 cm 4 cm 35 cm or 36 cm Working depth 12-30 cm 3-10 cm 20-30 cm Can be combined with: MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...
  • Page 40 4.9.2.4.1 Deflector guide arrangement on the Cenio 4000-2 CMS-T-00015723-A.1 The deflector guide arrangement is variable. The figure shows the recommended, factory-mounted deflector guide arrangement. The arrows show the throw direction produced by the deflector plates. MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...
  • Page 41 4 | Product description Soil tillage tools CMS-I-00010272 4.9.2.4.2 Deflector guide arrangement on the Cenio 5000-2 CMS-T-00018679-A.1 The deflector guide arrangement is variable. The figure shows the recommended, factory-mounted deflector guide arrangement. The arrows show the throw direction produced by the deflector plates.
  • Page 42 4 | Product description Soil tillage tools MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 43: Technical Data

    Tines with compression spring overload safety and a Type of tines on the Cenio Super tripping force of 500 kg 5.3 Mounting categories CMS-T-00015779-B.1 Three-point mounting frame Category 3 and Category 4N MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 44: Forward Speed

    The workplace-related emission sound pressure level is lower than 70 dB(A), measured in operating condition at the ear of the tractor driver with the cab closed. The emission sound pressure level mainly depends on the vehicle used. MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 45: Drivable Slope Inclination

    On left in direction of travel 15 % On right in direction of travel 15 % Up the slope and down the slope Up the slope 15 % Down the slope 15 % MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 46: Preparing The Machine

    Total weight of front-mounted implement or front ballast Permissible total weight of rear-mounted implement or rear ballast Distance between the centre of gravity of the front-mounted implement or the front ballast and the centre of the front axle MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...
  • Page 47 T b 0,2 T b Vmin Vmin Vmin CMS-I-00000513 2. Calculate the actual front axle load. × × - × G a b T b G c + d Vtat Vtat Vtat CMS-I-00000516 MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...
  • Page 48 Tyre load according to according to capacity for two tractor operating calculation tractor tyres manual ≤ Minimum front ballasting ≤ Total weight ≤ ≤ Front axle load ≤ ≤ Rear axle load MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 49: Coupling The Implement

    6.2.2 Attaching the ball sleeve for the top link CMS-T-00002045-A.1 1. Install the ball sleeve 1 with the top link pin 2 . 2. Secure the top link pin 2 with a linch pin 3 . CMS-I-00001223 MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 50: Driving The Tractor Towards The Implement

    Oil circulation until action is Momentary executed Free oil flow in the tractor control Floating unit Designation Function Tractor control unit Increase Working Green Double-acting depth Reduce Unfold Frame Blue Double-acting sections Fold MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 51: Coupling The Lighting For Road Travel

    2. Couple the lower links from the tractor seat. 3. Couple the top link 2 . 4. Check whether the top link catch hooks 3 and lower link catch hooks 4 are correctly locked. CMS-I-00001225 MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 52: Moving The Jacks Into Transport Position

    Damage to the tines and roller when folding Lift the implement completely. IMPORTANT Implement damage due to jacks not being moved into transport position Before unfolding the implement, make sure that the jacks are in transport position. MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 53: Removing The Road Safety Bars

    The height of the guide wheels must be adjusted such that they have ground contact during operation after adjusting the working depth of the coulters and when the implement is aligned longitudinally relative to the field. MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 54: Hydraulic Adjustment Of The Coulter Working Depth

    To synchronise the hydraulic cylinders, completely extend the hydraulic cylinders with the "green" tractor control unit. 2. Hold the "green" tractor control unit for 10 seconds. The hydraulic cylinders will be synchronised. MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 55: Adjusting The Wing Share

    4. Adjust all of the coulters in the same way. 6.3.7 Adjusting the automatic working depth adjustment of the levelling CMS-T-00004168-D.1 The working depth of the levelling is automatically adjusted when the working depth of the coulters is adjusted. MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 56: Preparing The Edge Levelling Discs For Operation

    The bearing journal and the hub of the edge levelling disc 3 serve as handles. 3. Turn the edge levelling disc to the desired position. 4. Tighten the bolts 1 . 5. Loosen the bolts 2 . CMS-I-00003276 MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 57: Adjusting The Scraper On The Roller

    Wedge ring roller KW / KWM 10 mm to 15 mm 10 mm Tooth packer roller PW 1 mm to 4 mm 1 mm Trapeze ring roller TRW 1 mm to 4 mm 1 mm MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 58: Adjusting The Trailing Elements

    4. Remove the pins on the second adjustment unit in the same way. 5. Lift or lower the harrow to the desired height. CMS-I-00007854 6. Secure the setting with the pins. 7. Secure the pins with the linch pins. MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...
  • Page 59 1. Pull out the both linch pins 1 on both adjustment units. 2. Lift or lower the harrow to the desired height. 3. Insert a linch pin through each of the holes directly above the bracket 2 . CMS-I-00007870 MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...
  • Page 60 1. Pull the linch pin 2 out of the pin 1 on both adjustment units of a spring blade bar or spring clearer bar. 2. Pull out the pin. 3. Turn the spring blade bar or spring clearer bar to the desired position. CMS-I-00007888 MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 61: Preparing The Machine For Road Travel

    1. Pull out the both linch pins on both adjustment units. If the harrow tines exceed the transport width when the implement is folded: Turn the harrow bar to a flatter tilt. MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...
  • Page 62 Turn the harrow bar to a flatter tilt. 3. Insert the linch pins 1 and 2 through each of the holes directly above and below the bracket CMS-I-00007936 MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 63: Putting On The Road Safety Bars

    2. Actuate the "blue" tractor control unit until the sections are completely folded. 6.4.5 Locking the tractor control units CMS-T-00006337-D.1 Depending on the equipment, the tractor control units are locked mechanically or electrically. MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 64: Using The Machine

    2. Turn around. When the direction of the implement matches the direction of travel: Lower the implement. 4. Switch the three-point power lift to float position. 5. Resume work. MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 65: Eliminating Faults

    The roller is working too deep. Reduce the working depth of the tines, see page 48. To unload the roller: Too much load on the roller. Slightly lift the implement with the three-point power lift. MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...
  • Page 66 2. Remove the shear bolt 2 and bolt 3 on the tine. CMS-I-00010351 3. Insert the new tine. 4. Install the shear bolt and bolt on the tine. 5. Tighten the shear bolt and the bolt. MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...
  • Page 67 1. Adjust the automatic working depth adjustment of the levelling unit, see page 49. 2. Adjust the edge levelling discs, see page 50. 3. Move the edge levelling discs, see page 51. MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...
  • Page 68 The hydraulic cylinders for the working depth adjustment have different lengths. 1. completely extend the hydraulic cylinders with the "green" tractor control unit. 2. Hold the "green" tractor control unit for 10 seconds. The hydraulic cylinders will be synchronised. MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 69: Parking The Machine

    6. Secure the position with the pin. CMS-I-00010360 7. Secure the pin with the linch pin. 8. Move the second jack into parking position in the same way. 9. Lower the implement. MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 70: Uncoupling The Three-Point Mounting Frame

    There must be enough space between the tractor and implement so that the supply lines can be uncoupled without obstructions. Drive the tractor away from the implement, leaving a sufficient distance. CMS-I-00004045 MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 71: Uncoupling The Lighting For Road Travel

    1. Secure the tractor and implement. 2. Put the control lever on the tractor control unit in float position. 3. Disconnect the hydraulic hose lines 1 . 4. Put the dust caps on the hydraulic sockets. CMS-I-00001065 MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...
  • Page 72 9 | Parking the machine Disconnecting the hydraulic hose lines 5. Hang the hydraulic hose lines 1 in the hose cabinet. CMS-I-00001250 MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 73: Repairing The Implement

    Checking the connection of tines with shear bolt overload safety see page 69 Checking the adjustment spindles of the automatic levelling unit depth see page 71 adjustment Checking the levelling connection see page 71 MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 74: Checking The Connection Of Tines With Compression Spring Overload Safety

    10.1.2 Checking the connection of tines with compression spring overload safety CMS-T-00015790-A.1 INTERVAL After initial operation Every 50 operating hours Weekly Check the bolted connections 1 for centred and 120 Nm tight fit. CMS-I-00010367 MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 75: Checking The Connection Of Tines With Shear Bolt Overload Safety

    1,5 mm 3. Measure the bearing clearance between the pin and the cast holder. 4. Measure the bearing clearance between the pin and the bearing arm. Maximum permissible bearing clearance: 1.5 mm. CMS-I-00010210 MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 76: Replacing C-Mix-3 Coulters

    Do not allow carriage bolts to rotate. 1. Remove the bolts. 2. Replace the coulters. 3. Install the bolts. 4. Tighten the bolts. 145 Nm 5. Retighten the bolts after 5 operating hours. CMS-I-00003077 MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 77: Checking The Adjustment Spindles Of The Automatic Levelling Unit Depth Adjustment

    Check the locknut 1 on the adjustment spindles for tight fit. CMS-I-00010426 10.1.7 Checking the levelling connection CMS-T-00015787-A.1 INTERVAL After initial operation Every 12 months Check the bolted connections 1 for tight fit. CMS-I-00010368 MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 78: Checking The Disc Carrier Connection

    Every 12 months 1. Perform a visual check of the disc carrier rubber O-rings 1 . CMS-I-00010370 WORKSHOP WORK If the disc carrier rubber O-rings are damaged: Replace the disc carrier rubber O-rings. MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 79: Checking The Bearings Of The Levelling Discs

    10.1.11 Replacing the discs CMS-T-00002327-I.1 INTERVAL As required Original disc diameter Wear limit 46 cm 36 cm 48 cm 40 cm 51 cm 36 cm 61 cm 43 cm 66 cm 46 cm MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 80: Checking The Rollers

    Check the bolts 1 for tightness. If the bolts need to be replaced, pay attention to the alignment of the bolts. Check the roller bearing 2 for ease of movement. 210 Nm CMS-I-00000099 MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 81: Checking And Adjusting The Scraper On The Roller

    10.1.14 Checking the lower link pins and top link pins CMS-T-00002330-K.1 INTERVAL Daily Criteria for visual inspection of lower link pins and top link pins: Cracks Fractures Permanent deformations Permissible wear: 2 mm MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 82: Checking The Hydraulic Hose Lines

    3. Retighten loose bolted connections. Hydraulic hose lines must not be more than 6 years old. 4. Check the manufacturing date 1 . CMS-I-00000532 WORKSHOP WORK 5. Replace worn, damaged or aged hydraulic hose lines. MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 83: Checking The Hydraulic Cylinder For Folding

    10.1.16 Checking the hydraulic cylinder for folding CMS-T-00015792-A.1 INTERVAL After initial operation Every 12 months Check the tightening torque of the locknut 1 on both hydraulic cylinders for folding. 300 Nm CMS-I-00010371 MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 84: Lubricating The Implement

    Thoroughly clean the grease nipples and the grease gun. Only grease the implement with the lubricants listed in the technical data. CMS-I-00002270 Press the dirty grease completely out of the bearings. MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 85: Overview Of Lubrication Points

    10 | Repairing the implement Lubricating the implement 10.2.1 Overview of lubrication points CMS-T-00015656-B.1 CMS-I-00010398 MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 86: Cleaning The Implement

    Always maintain a minimum distance of 30 cm between the high-pressure nozzle and the implement. Do not exceed a water pressure of 120 bar. MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 87: Storing The Implement

    1. Clean the machine. 2. Protect unpainted components from corrosion using a suitable corrosion inhibitor. 3. Grease all lubrication points. Remove excess grease. 4. Park the implement in a sheltered place. MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 88: Loading The Implement

    If the lashing straps are not attached at the marked lashing points, the implement can be damaged during lashing and endanger safety. Attach the lashing straps only at the marked lashing points. CMS-I-00010397 MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...
  • Page 89 Lashing the implement 1. Put the implement on the transport vehicle. 2. Attach the lashing straps at the marked points. 3. Lash down the implement in compliance with the national regulations for load securing. MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 90: Disposing Of The Implement

    2. Return batteries to the distributor Dispose of batteries at a collection point. 3. Put recyclable materials in the recycling. 4. Treat operating materials like hazardous waste. WORKSHOP WORK 5. Dispose of the coolant. MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 91: Appendix

    380 Nm 290 Nm 405 Nm 485 Nm 27 mm M18x1.5 325 Nm 460 Nm 550 Nm 410 Nm 580 Nm 690 Nm 30 mm M20x1.5 460 Nm 640 Nm 770 Nm MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 92: Other Applicable Documents

    2.4 Nm 112 Nm 4.9 Nm 174 Nm 8.4 Nm 242 Nm 20.4 Nm 342 Nm 40.7 Nm 470 Nm 70.5 Nm 589 Nm 13.2 Other applicable documents CMS-T-00015771-A.1 Tractor operating manual MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 93: Directories

    Tractor In this operating manual, the designation tractor is always used, even for other agricultural tractor units. Implements are mounted on the tractor or towed by the tractor. MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

  • Page 94: Index

    Contact data 12-125 HI KWM/DW, adjusting the height Technical editing 12-125 HI KWM/DW, adjusting the tilt 12-125 HI KWM/DW, moving into transport Coulters position Adjust the working depth hydraulically Replacing C-Mix-3 coulters Headlands MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...
  • Page 95 Rear lighting Checking the levelling connection Description Position Position Preparing for road travel Road safety bars Lighting for road travel attachment connecting removing disconnecting Front Road travel Position Preparing the machine Rear MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...
  • Page 96 Threaded cartridge Adjusting the edge levelling discs Description Hydraulic coulter adjustment Position Working depth indicator Three-point mounting frame of the coulters, position coupling Working speed Position uncoupling Workshop work Tine with coulter Position MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...
  • Page 98 AMAZONEN-WERKE H. DREYER SE & Co. KG Postfach 51 49202 Hasbergen-Gaste Germany +49 (0) 5405 501-0 amazone@amazone.de www.amazone.de MG7821-EN-GB | D.1 | 22.05.2025 | © AMAZONE...

This manual is also suitable for:

Cenio 4000-2

Table of Contents