Table of Contents
Advertisement
Quick Links
User Manual
M110T0032-EN, applies to M-110.xxx1 / M-111.xxx1 / M-112.xxx1
MMa 30. November 2021
M-110.xxx1 / M-111.xxx1 / M-112.xxx1
Microtranslation Stage
User Manual
Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany
Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws,
Micropositioning stage with HD D-Sub 26
connector, in variants according to:
•
Travel range: 5 mm / 15 mm / 25 mm
•
Drive screw type: Threaded drive screw /
ball screw
•
Gear drive: stepper motor / DC motor
www.pi.ws
Page 1 / 28
Advertisement
Table of Contents
Troubleshooting
Related Manuals for PI M-110 1 Series
Summary of Contents for PI M-110 1 Series
- Page 1 Drive screw type: Threaded drive screw / ball screw • Gear drive: stepper motor / DC motor Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 1 / 28 Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws, www.pi.ws...
-
Page 2: Table Of Contents
X/Y Combination Mounting Diagram ..........................26 X/Z Combination Mounting Diagram (with Mounting Adapter) ................... 27 Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 2 / 28 Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws,... - Page 3 Figures, Commitment, Actuality ........................... 28 Copyright ..................................28 Contact Person, Feedback ............................. 28 Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 3 / 28 Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws,...
-
Page 4: Safety
(intended use, maximum ratings, ambient conditions, load ranges, settings, process descriptions). Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 4 / 28 Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws,... -
Page 5: Basic Safety Instructions
Additional Safety Notes for Vacuum-Capable Products When handling the product, attention must be paid to appropriate cleanliness. At PI, all parts are cleaned before assembly. For assembly /measurement, powder-free gloves are worn. The product is wiped clean once again and then shrink-wrapped twice in vacuum-compatible film. -
Page 6: Naming Product And System Components
10 Product labeling area, incl. model designation and serial number Direction of motion on positive command in the control software Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 6 / 28 Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws,... -
Page 7: Further Information On The Product And The System Components
MMa 30. November 2021 Further Information on the Product and the System Components The products (and programs) from PI mentioned here are normally described in more detail separately (search for the product name on the website to get the user manual). -
Page 8: Mechanical Installation
Surface with holes and M3 thread according to the position of the mounting holes in the positioner (see fig.); min. depth of 3 mm. Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 8 / 28 Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws,... - Page 9 Insert the AF 1.5 hex key into the drive screw inlet. Place the positioner onto the surface so that its mounting holes are in line. Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 9 / 28 Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws,...
- Page 10 Repeat steps 5 and 6 accordingly for the remaining screws. Check that the positioner is affixed firmly to the surface. Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 10 / 28 Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws,...
- Page 11 Tighten the 4 mounting screws completely. Check that the positioner is firmly attached to the surface. Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 11 / 28 Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws,...
-
Page 12: Mounting The Payload On The Platform
2. Use the mounting screws to affix the payload (tightening torque: Max. 1.5 Nm). 3. Check that the payload is attached firmly to the platform of the positioner. Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 12 / 28 Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws,... -
Page 13: Electrical Installation
(turn the knurled screws counterclockwise) before connecting directly to the controller. Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 13 / 28 Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws,... - Page 14 Connect the controller to the corresponding power adapter. Use the power cord to connect the power adapter to the mains supply. Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 14 / 28 Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws,...
-
Page 15: Integration Into The Control Software And Initial Test
(see user manual for the Controller) If the error persists, contact the customer service department (service@pi.de) Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 15 / 28 Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws,... -
Page 16: Coordinate System / Direction Of Motion
Coordinate System / Direction of Motion The position of the platform at the left end of the travel range corresponds to the zero point. Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 16 / 28 Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws,... -
Page 17: Maintenance, Cleaning, Troubleshooting, And Disposal
After cleaning, reconnect the motor cable to the controller and tighten the screws to secure the plug. Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 17 / 28 Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws,... -
Page 18: Troubleshooting
− Clockwise: Platform moves away from the cable exit. − Anticlockwise: Platform moves towards the cable exit. Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 18 / 28 Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws,... -
Page 19: Repair And Warranty
In order to fulfil the responsibility as the product manufacturer, PI undertakes environmentally correct disposal of all old PI equipment made available on the market after 13 August 2005 without charge. Any old PI equipment can be sent free of charge to the following address: Physik Instrumente (PI) GmbH &... -
Page 20: Appendix
Degree of pollution Degree of protection according to IEC 60529 IP40 Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 20 / 28 Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws, www.pi.ws... -
Page 21: Data
Reference and Hall effect Hall effect Hall effect Hall effect Hall effect Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 21 / 28 Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws, www.pi.ws... - Page 22 C-863.11 C-663.12 C-663.12 C-863.20C885 C-863.20C885 C-884.xDC C-884.xDC * With recommended controller. Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 22 / 28 Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws, www.pi.ws...
-
Page 23: Dimensions
M110T0032-EN, applies to M-110.xxx1 / M-111.xxx1 / M-112.xxx1 MMa 30. November 2021 Dimensions Values in mm. Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 23 / 28 Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws, www.pi.ws... -
Page 24: Hd D-Sub 26 Pin Assignment
Power (5 V DC) Power (5 V DC) Power (5 V DC) Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 24 / 28 Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws,... -
Page 25: Options And Additional Accessories
Align the mounting holes with the same letter and mount the positioner with mounting screws (see fig. below). Pay attention to the max. tightening torque of 1.5 Nm. Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 25 / 28 Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws,... -
Page 26: X/Y Combination Mounting Diagram
MMa 30. November 2021 X/Y Combination Mounting Diagram INFORMATION Schematic illustrations, details may differ. Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 26 / 28 Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws, www.pi.ws... -
Page 27: X/Z Combination Mounting Diagram (With Mounting Adapter)
X/Z Combination Mounting Diagram (with Mounting Adapter) INFORMATION Schematic illustrations, details may differ. Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstrasse 1, 76228 Karlsruhe, Germany Page 27 / 28 Phone +49 721 4846-0, Fax +49 721 4846-1019, Email info@pi.ws,... -
Page 28: Legal Information
Copyright © 2020 Physik Instrumente (PI) GmbH & Co. KG, Auf der Roemerstr. 1, 76228 Karlsruhe, Germany. The product and the associated technical documentation are protected by copyright. Information on any brand names used can be found under: https://www.physikinstrumente.de/de/ueber-pi/impressum/#c2147...
Need help?
Do you have a question about the M-110 1 Series and is the answer not in the manual?
Questions and answers