Hytronik HCD450/D2 Application/Installation And Instruction Manual

Installation and Instruction Manual
Microwave Motion Sensor
DALI Output
1. Technical Specifications
Sensor principle
High Frequency (microwave)
Operation frequency 10.525GHz
Frequency range
>10.5 Ghz and <10.6 Ghz
Operating yoltage 120 ~ 277VAC 50/60Hz
Warming-up
20s
Current Consumption Max. 2mA from DALI Bus
Output DALI-2 Command
Transmission power <0.5mW
Max installation height: 27m (forklift)
Detection range(Max.)
Max installation height: 20m (human)
Max detection range: 17 * 14m (L * W)
Detection angle 30° ~ 150°
Operation temperature Ta: -20°C ~ +60°C
Case temperature (Max.) Tc: +75°C
Storage temperature -40°C ~ 70°C
Relative humidity 20 ~ 90%
IP rating
IP65
Insulation Class II
Wire Preparation
0.75~1.5mm²
8mm
To make or release the wire from the terminal,
use a screwdriver to push down the button.
1. 200 metres (total) max. for 1mm² CSA (Ta = 50℃)
2. 300 metres (total) max. for 1.5mm² CSA (Ta = 50℃)
Subject to change without notice.
HCD450/D2
2. Installation
Mechanical Structure & Dimensions
Wire out
HCD450/D2-20250527-A1
Wiring Diagram
3.Detection Pattern
60°
27m
27m
17m
17m
Forklift driving
60°
3m
24m
Single person continuous walking
Subject to change without notice.
———This product should be installed by a qualified electrician.
60°
20m
20m
12m
12m
Single person continuous walking
16m
24m
15m
Single person continuous walking
HCD450/D2-20250527-A1