Exsys EX-1320-3 Manual

CONNECTOR & STATUS LEDs
Status LED's:
LED Name Color LED Function
Link/Act Green Continuously on: The Connection on the Ethernet port
is built and Active
Flash: Transmit Data
Off: Network connection is disconnected
Speed Yellow Off: 10/100Mbps Mode
Continuously on: Gigabit (1000Mbps) Mode
HARDWARE INSTALLATION
Because there are large differences between PC's, we can give you only a general installation
guide for the EX-1320-3. Please refer your computer's reference manual whenever in doubt.
1. Connect the EX-1320-3 to the A-Port at your PC.
2. Now you can connect a network cable at the EX-1320-3.
DRIVER INSTALLATION
Windows XP/ Vista/ 7/ 8.x/ 10/ Server 20xx
After the hardware installation, the operating system will recognize the device automatically and
install the drivers.
CHECK INSTALLED DRIVER
Open the >Device manager<. Now you should see at „Ethernet Adapter" the following new
entry:
If you see this or a similar information the device is installed correctly.
CLEANING
For cleaning please use only a dry fluff less cloth and remove the dirt with gently pressure. In
the area of the connectors please make sure that no fibres from the cloth remain in the connect-
ors. Attention! Never use a moist or wet cloth for cleaning!
5
Germany: Switzerland: Italy:
EXSYS Vertriebs GmbH EXSYS Vertriebs GmbH EXSYS Italia Srl
Dübendorfstrasse 17 Via Belvedere, 45/B
Industriestrasse 8
61449 Steinbach 8602 W angen I-22100 Como
www.exsys.it
www.exsys.de www.exsys.ch
6
Manuale
Anleitung
Vers. 1.0, 21.02.25
STRUTTURA
USB 3.2 Gen 1 Type-A
per il collegamento al PC
DESCRIZIONE E DATI TECNICI
Con l'EX-1320-3, notebook e PC desktop possono essere integrati in una rete da 10/100 o 1000
Mbps tramite l'uscita USB 3.2 Gen 1 (ex USB 3.0) o 2.0. Può essere installato in parallelo con una
scheda di rete esistente. L'installazione è molto semplice e può essere effettuata senza aprire il
computer. L'alimentazione avviene tramite la porta USB (alimentazione da bus).
Compatibilità: USB 1.1, 2.0, 3.2 Gen 1 / TCP/IP 10/100/1000
Sistema Operativo: Windows XP/ Vista/ 7/ 8.x/ 10/ 11/ Server 20xx/ Linux/ Mac OS 10.x
Connettori: 1x USB 3.2 Gen 1 Type-A, 1x RJ45 Gigabit Ethernet
Confezione: EX-1320-3, Manuale
CONNETTORE E STATO DEL LED
Connettore RJ45:
Connettore RJ45
Pin Segnale Pin Segnale
1 BI_DA+ 4 BI_DC+
2 BI_DA- 5 BI_DC-
3 BI_DB+ 6 BI_DB-
1
EX-1320-3
Stato LED
Connettore
RJ45
Pin Segnale
7 BI_DD+
8 BI_DD-