Ul 2043 Certification; Anti-Theft Features - Cisco 1242AG - Aironet - Wireless Access Point Hardware Installation Manual

Hardware installation guide
Table of Contents

Advertisement

Chapter 1
Overview
Some switches and patch panels might not provide enough power to operate the access point with both
Note
2.4-GHz and 5-GHz radios. At power-up, if the access point is unable to determine that the power source
can supply sufficient power, the access point automatically deactivates both radios to prevent an
over-current condition. The access point also activates a Status LED low power error indication and
creates an error log entry (refer to the
page 3-2

UL 2043 Certification

The access point has adequate fire resistance and low smoke-producing characteristics suitable for
operation in a building's environmental air space, such as above suspended ceilings, in accordance with
Section 300-22(c) of the NEC, and with Sections 2-128, 12-010(3) and 12-100 of the Canadian
Electrical Code, Part 1, C22.1.
Only the fiber-optic power injector (AIR-PWRINJ-FIB) has been tested to UL 2043 for operation in a
Caution
building's environmental air space; the AIR-PWRINJ3 power injector and the power module are not
tested to UL 2043 and should not be placed in a building's environmental air space, such as above
suspended ceilings.

Anti-Theft Features

There are three methods of securing the access point:
Figure 1-4
1
OL-8371-05
and the
"Checking Basic Settings" section on page
Security cable keyhole—You can use the security cable slot (see
point using a standard security cable, like those used on laptop computers (refer to the
Security Cable" section on page
Security hasp—When you mount the access point on a wall or ceiling using the mounting plate and
the security hasp, you can lock the access point to the plate with a padlock (see
Compatible padlocks are Master Lock models 120T and 121T or equivalent.
Access Point with Security Hasp and Padlock
2. 4 G
H z LE
F T
2. 4 G
H z R
IG H T
/ P R IM
A R Y
1
2
Security hasp
"Checking the Lightweight Access Point LEDs" section on
2-17).
2
Security padlock
Cisco Aironet 1240AG Series Access Point Hardware Installation Guide
Hardware Features
3-3).
Figure
1-3) to secure the access
Figure
"Using a
1-4).
1-7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aironet 1240ag seriesAir-ap1242agAir-ap1242g

Table of Contents