Powering On The; Checking Before Power - H3C WX5002ACCESSCONTROLLER Installation Manual

Figure 4-6 Set terminal emulation in H3C Properties window
Powering On the AC
Checking Before Power-On
Before powering on the AC, verify that:
The power cord is properly connected.
The power supply voltage is within the range labeled on the AC.
The console cable is properly connected; the terminal (for example, a PC) used for configuration
has been started; the configuration parameters have been set.
Powering On the AC
The following is information output by a WX5002 AC after it is powered on and started up.
*********************************************
*
* H3C WCM BootWare , Ver 1.16
*
*******************************************
Copyright(c) 2004-2009 Hangzhou H3C Technologies Co., Ltd.
Compiled date
CPU type
CPU L1 DCache
CPU L1 ICache
CPU L2 Cache
CPU Clock Speed : 700MHz
Memory Type
Memory Size
: May 6 2009, 20:21:15
: BCM1250
: 32KB
: 32KB
: 512KB
: DDR SDRAM
: 1024MB
*
*
*
4-4