System Specifications - H3C WX5002ACCESSCONTROLLER Installation Manual

LED
LED of gigabit
combo interface
1
LED of gigabit
combo interface
2

System Specifications

Table 1-3 System specifications of the WX5002 AC
Dimensions (H × W × D)
Weight
Management interface
GE interfaces on the front panel
Optional SFP modules
Processor
DRAM configuration
Flash configuration
Input voltage
Mark
Solid green
1000M
Flashing green (6 Hz)
OFF
Solid yellow
10/100M Flashing yellow (6 Hz)
OFF
Solid green
1000M
Flashing green (6 Hz)
OFF
Solid yellow
10/100M Flashing yellow (6 Hz)
OFF
Item
43.6 × 440 × 300 mm (1.7 × 17.3 × 11.8 in.)
4.1 kg (9.0 lb.)
One console interface, one 10/100 BASE-TX out-of-band
management interface
Two 10/100/1000 BASE-T auto-sensing Ethernet electrical
interfaces
Two gigabit SFP Ethernet optical interfaces
1000 BASE-SX SFP optical module
1000 BASE-LX SFP optical module
BCM1250 700 M
DDRI 512 MB
32 MB
Rated voltage range: 100 VAC to 240 VAC, 50 Hz or 60 Hz
AC
Input voltage range: 90 VAC to 264 VAC, 47 Hz to 63 Hz
Status
1000 Mbps interface connection
succeeds.
The 1000 Mbps interface is receiving or
transmitting data.
The 1000 Mbps interface is not connected
or the connection fails.
10/100 Mbps interface connection
succeeds.
The 10/100 Mbps interface is receiving or
transmitting data.
The 10/100 Mbps interface is not
connected or the connection fails.
1000 Mbps interface connection
succeeds.
The 1000 Mbps interface is receiving or
transmitting data.
The 1000 Mbps interface is not connected
or the connection fails.
10/100 Mbps interface connection
succeeds.
The 10/100 Mbps interface is receiving or
transmitting data.
The 10/100 Mbps interface is not
connected or the connection fails.
1-4
Description
Data