Bootware Submenus - H3C WX5002ACCESSCONTROLLER Installation Manual

You can try up to three times to type the BootWare password (the initial password is null). If you have
tried three times but the password is still incorrect, you need to reboot the system. After you type the
correct password, the system enters the BootWare main menu:
==================<EXTEND-BOOTWARE MENU>===================
| <1> Boot System
| <2> Enter Serial SubMenu
| <3> Enter Ethernet SubMenu
| <4> File Control
| <5> Modify BootWare Password
| <6> Ignore System Configuration
| <7> BootWare Operation Menu
| <8> Clear Super Password
| <0> Reboot
===========================================================
Enter your choice (0-8):
The menu is described in the following table.
Table 5-1 BootWare main menu
<1> Boot System
<2> Enter Serial SubMenu
<3> Enter Ethernet SubMenu
<4> File Control
<5> Modify BootWare Password
<6> Ignore System Configuration
<7> BootWare Operation Menu
<8> Clear Super Password
<0> Reboot

BootWare Submenus

Serial submenu
You can upgrade application programs, change the serial interface baud rate and so on through this
submenu.
Select 2 in the BootWare main menu to enter the serial submenu.
======================<SERIAL SUB-MENU>======================
| <1> Download Application Program To SDRAM And Run
| <2> Update Main Application File
| <3> Update Backup Application File
| <4> Update Secure Application File
Menu item Description
Boot the system
Enter the serial submenu. For detailed description,
refer to Serial submenu.
Enter the Ethernet submenu. For detailed description,
refer to Ethernet submenu.
File control submenu. For detailed description, refer to
File control submenu.
Modify the BootWare password.
Boot the system with the system configuration ignored
BootWare operation submenu. For detailed
description, refer to BootWare operation submenu.
Clear the super password.
Reboot the AC.
5-4
|
|
|
|
|
|
|
|
|
|
|
|
|