Table of Contents
Advertisement
Figure 11 Connecting the power adapter
Verifying the installation
Before powering on the device, verify that:
The workbench is stable.
•
•
There is sufficient clearance around the device.
The power source is as required.
•
The grounding cable is securely connected.
•
The console cable and power cord are correctly connected.
•
Powering on the device
The following uses the WAC360 access controller as an example.
To start the device:
1.
Power on the device. The device initializes its memory and runs BootWare. The following
information appears on the terminal screen:
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU
Press Ctrl+T to start heavy memory test
Booting Normal Extend BootWare
The Extend BootWare is self-decompressing.........................Done!
****************************************************************************
*
*
*
****************************************************************************
Copyright (c) 2004-2017 New H3C Technologies Co., Ltd.
Compiled Date
CPU Type
CPU L1 Cache
H3C WAC360 BootWare, Version 1.02
: April 19 2017
: BCM58622
: 32KB
12
*
*
*
Advertisement
Table of Contents
