Maintaining Application Programs And Configurations Through Command Lines - H3C WX5002ACCESSCONTROLLER Installation Manual

Table of Contents

The TFTP server is not provided with H3C WX5002 AC. You need to purchase and install it yourself.

Step 2: Modify Ethernet interface parameters. Refer to section "Configuring Ethernet Interface

Parameters" on page 5-11 for details.

Step 3: After the above configuration, select 3 in the BootWare main menu to enter the Ethernet

submenu. In the following example, select 2 to upgrade the main application file.

Starting the TFTP download.................................Done

Please input file name(Press 'Enter' use default name):

After the download is done, enter the file name to start upgrade.

........................................................................................

................................................

Writing into Flash Succeeds.

Step 4: Select 0 to return to the BoorWare main menu. Select 1 to boot the system.

If the input file name is the same as the one of the original file in the Flash, the system prompts

"flash:/main.bin exist, overwrite?[Y/N]". If you choose Y, the original file in the Flash will be

overwritten.

Make sure the available space on the Flash is sufficient. Or, the system prompts insufficient space:

No enough space in flash!

Writing into Flash Fails.

The updated file will directly replace the original one of this type and become the only application

file. In this example, the downloaded file main.bin replaces the original type M file and becomes the

main application file.

Refer to section "Files Managed by the AC" on page 5-1 for detailed descriptions on file types.

Maintaining Application Programs and Configurations Through

Command Lines

After booting the AC normally, you can upgrade/back up application programs and back up/restore

configurations through command lines.

5-13

Table of Contents

Wx5002