Brother NC7100W - NC 7100w Print Server Network User's Manual page 79

Troubleshooting
Brother machine cannot print over the network.
Brother machine is not found on the network even after the successful installation. (continued)
Question
Is your Brother machine
assigned with an available
IP address?
(continued)
Interface Solution
wired/
®
1 (Windows
wireless
Click the Start button, All Programs (Programs for Windows
Accessories and Windows Explorer, and then My computer.
(Windows Vista
Click the
2 Double-click Local Disk (C:), Program Files or Program Files (x86)
for 64-bit OS users, Browny02, Brother, BrotherNetTool.exe to run the
program.
Note
If the User Account Control screen appears,
(Windows Vista
®
(Windows
3 Follow the on screen instructions.
4 Check the diagnosis by printing the Network Configuration List.
Note
The Network Connection Repair Tool will start automatically if you check
Enable Network Connection Repair Tool from the Options tab on
Status Monitor. This is not recommended when your network
administrator has set the IP address to static, since it will automatically
changes the IP address.
If the correct IP address and the Subnet mask are still not assigned even
after using the Network Connection Repair Tool, ask the network
administrator for this information, or visit the Brother Solutions Center at
http://solutions.brother.com/.
2000/XP, Windows Server
® ®
/Windows 7)
button and Computer.
®
) Click Continue.
7) Click Yes.
®
2003/2008)
®
2000),
8
74