Brother NC7100W - NC 7100w Print Server Network User's Manual page 23

Configuring your machine for a wireless network (For HL-4570CDW(T))
b
Press + or - to choose Network.
Press OK.
c
Press + or - to choose WLAN.
Press OK.
d
Press + or - to choose Setup Wizard.
Press OK.
e
When WLAN Enable? is displayed, press + to accept.
This will start the wireless setup wizard.
To cancel, press Cancel.
f
The machine will search for your network and display a list of available SSIDs.
Choose <New SSID> using + or -.
Press OK.
g
Enter the SSID name. (For information how to enter text, see the Quick Setup Guide.)
Press OK.
h
Using + or -, choose Ad-hoc or Infrastructure when instructed.
Press OK.
Do one of the following:
If you chose Ad-hoc, go to step j.
If you chose Infrastructure, go to step i.
i
Choose the Authentication method using + or -, and press OK.
Do one of the following:
If you chose Open System, go to step j.
If you chose Shared Key, go to step k.
If you chose WPA/WPA2-PSK, go to step l.
j
Choose the Encryption type None or WEP using + or -, and press OK.
Do one of the following:
If you chose None, go to step n.
If you chose WEP, go to step k.
k
Enter the WEP key you wrote down in step a. Press OK. Go to step n. (For information how to enter
text, see the Quick Setup Guide.)
l
Choose the Encryption type, TKIP or AES using + or -. Press OK. Go to step m.
3
18