Brother NC7100W - NC 7100w Print Server Network User's Manual page 78

Troubleshooting
Brother machine is not found on the network during the printer driver installation. (continued)
Question
Is there a wireless
computer, Bluetooth
supported device,
microwave oven or digital
cordless phone near the
Brother machine or the
WLAN access point/router?
Brother machine cannot print over the network.
Brother machine is not found on the network even after the successful installation.
Question
Are you using security
software?
Is your Brother machine
assigned with an available
IP address?
Interface Solution
wireless Move all the devices away from Brother machine or WLAN access
point/router.
Interface Solution
wired/ See I'm using security software. on page 75.
wireless
wired/  Confirm the IP address and the Subnet Mask
wireless
Verify that both the IP addresses and Subnet Masks of your computer
and the Brother machine are correct and located on the same network.
For more information on how to verify the IP address and the Subnet
Mask, ask the network administrator or visit the Brother Solutions Center
at http://solutions.brother.com/.
®
 (Windows )
Confirm the IP address and the Subnet Mask using the Network
Connection Repair Tool.
Use the Network Connection Repair Tool to fix the Brother machine's
network settings. It will assign the correct IP address and the Subnet
Mask.
To use the Network Connection Repair Tool, ask the network
administrator for the details and then follow the steps below:
Note
®
• (Windows
®
Vista /Windows
• Make sure that the Brother machine is turned on and is
network-connected to your computer.
2000 Professional/XP/XP Professional x64 Edition/Windows
®
7) You must log on with Administrator rights.
8
73