Brother NC7100W - NC 7100w Print Server Network User's Manual page 19

Configuring your machine for a wireless network (For HL-4570CDW(T))
Configuration temporarily using a USB or network cable
You can temporarily use a USB cable or network cable when you configure your Brother machine in this
method.
 You can remotely configure the machine from a computer that is also on the network using a USB cable
1
(A) .
1
You can configure the wireless settings of the machine using a USB cable temporarily connected to a wired or wireless computer.
 If there is an Ethernet Hub or Router on the same network as the WLAN access point (A), you can
temporarily connect the Hub or Router to the machine using a network cable (B). You can then remotely
configure the machine from a computer on the network.
3
3
14