Brother NC7100W - NC 7100w Print Server Network User's Manual page 35

Wireless configuration using the Brother installer application (For HL-4570CDW(T))
®
(Windows XP SP2)
1
Click Start and then Control Panel.
2
Click the Network and Internet Connections icon.
3
Click the Network Connections icon.
4
Choose and right-click Wireless Network Connection. Click View Available Wireless
Networks.
5
You can see the SSID of the wireless printer in the list. Choose SETUP and click Connect.
6
Check the Wireless Network Connection status. It may take a few minutes to change from
0.0.0.0 to the 169.254.x.x IP address to be shown on screen (where x.x. are numbers between 1
and 254).
(Macintosh)
1
Click the AirPort status icon in the menu bar.
2
Select SETUP from the pop-up menu.
3
Your wireless network is connected successfully.
d
Follow the screen instructions to configure the wireless settings.
After you have completed the wireless setup, you can proceed to the printer driver installation.
Click Next in the installation dialog and follow the screen instructions.
4
30