Brother NC7100W - NC 7100w Print Server Network User's Manual page 72

Security features
j
Click Yes, if the fingerprint (thumbprint) is correct.
Note
The fingerprint (thumbprint) is printed on the Network Configuration List. (To learn how to print the Network
Configuration List, see Printing the Network Configuration List on page 35.)
k
Click OK.
l
The self-signed certificate is now installed on your computer, and SSL/TLS communication is available.
How to create a CSR
a
Click Create CSR on the Configure Certificate page.
b
Enter a Common Name and your information, such as Organization. Then click Submit.
Note
• We recommend that the Root Certificate from the CA be installed on your computer before creating the
CSR.
• The length of the Common Name is less than 64 bytes. Enter an identifier such as an IP address, node
name or domain name to use when accessing this printer through SSL/TLS communication. The node
name is displayed by default. The Common Name is required.
• A warning will pop-up if you enter a different name in the URL than the Common Name that was used for
the certificate.
• The length of the Organization, the Organization Unit, the City/Locality and the State/Province is less
than 64 bytes.
• The Country/Region should be an ISO 3166 country code composed of two characters.
• If you are configuring X.509v3 certificate extension, choose the Configure extended partition check box
and then choose Auto or Manual.
c
When the contents of the CSR appear, click Save to save the CSR file to your computer.
7
7
67