Select A Channel; Set Squelch - Uniden MHS050-2 Owner's Manual

Floating vhf marine radio

Hide thumbs Also See for MHS050-2:

Table of Contents

Select a Channel

Press CH

Press and hold CH

channel numbers. Refer to page 19 for a list of available channels

and their corresponding frequencies and usage guidelines.

Use squelch to eliminate any annoying background noise when

there are no signals present.

Make sure to first select a channel not in use before

setting the squelch.

NOTE

S1 - minimum squelch

S2 - medium squelch

or CH

to scroll though the channels individually.

or CH

Think of the squelch control as a gate. If

you increase the squelch level to maximum,

it raises the "Squelch Gate" so only the

strongest signals get through.

If you decrease the squelch level to minimum,

it lowers the "Squelch Gate"' to the extent that

weak signals can get through.

If unwanted weak and noisy signals are

getting through, increase the squelch level

(raise the "Squelch Gate") to a medium level.

Now only medium and strong signals get

through.

Uniden MHS050-2 Owner's Manual

to scroll rapidly through the

E-13

Table of Contents