Attaching The Beltclip; Operation; Basics; Power On/Off - Uniden Atlantis 150 Owner's Manual

ATTACHING THE BELTCLIP

To attach the belt clip:
Slide the belt clip until it snaps into place.
To remove the belt clip:
Press and hold the belt clip lock down while simultaneously
sliding it upward until it releases.

OPERATION

In order to get the most out of your new radio, read this owner's
manual completely before attempting to operate the unit.

BASICS

Power On/Off

1. Press and hold
battery level should appear on the display.
2. Press and hold

Volume

The volume level can be adjusted from
(no volume) to
Press VO or VO
the volume level. The current volume level
flashes.

Select a Channel

Press CH or CH
Press and hold CH
channel numbers. Refer to page 25 for a list of available
channels and their corresponding frequencies and usage
guidelines.
E-12
to turn the radio ON. A channel number and
to turn the radio OFF.
15
(maximum volume).
to increase or decrease
to scroll though the channels individually.
or CH
Uniden Atlantis 150 Owner's Manual
0
to scroll rapidly through the
VOL
HI