Setting The Uic Channel Mode (Usa/Can/Intl; Setting Key Lock; Setting Wx Alert Mode; Setting Fips Codes - Uniden MHS335BT Owner's Manual

Floating vhf marine radio
Table of Contents

Advertisement

NOTE: Setting the squelch level too high may prevent you from hearing weaker transmissions. If
you are having difficulty hearing a transmission, try setting the squelch level lower.

Setting the UIC Channel Mode (USA/CAN/INTL)

You can select marine channels for the USA, Canada, or International waters.
1.
Press MENU, then select
screen displays.
2.
Select USA, CAN, or INTL and select the SELECT soft key. The
screen displays again.
3.
Select BACK twice to return to the Idle screen.

Setting Key Lock

You can lock the keypad through pressing and holding the
displays if you press a key while keylock is on. Unlock it by pressing and holding the
LOCK key again. UNLOCK displays.
NOTE: Key Lock does not affect PTT or the Distress key. If DISTRESS is pressed, Key Lock turns off

Setting WX Alert Mode

1.
Press MENU, then select
2.
Select WX Alert. The WX ALERT screen displays with the options to turn this alert on
or off.
3.
Select ON. The WEATHER RADIO screen displays again.
4.
Select BACK to return to the
5.
Turn WX Alert off through these same menus.

Setting FIPS Codes

FIPS codes identify counties in the United States. FIPS codes allow you to receive only the
Specific Area Message Encoding (S.A.M.E.) alert occurring in a specific area. You can enter
a maximum of 30 FIPS codes.
NOTE: For USA FIPS codes by state, see http://www.nws.noaa.gov/mirs/public/prods/maps/cnty_
fips_list.htm. For Canadian FIPS codes, see https://www.ec.gc.ca/meteo-weather/default.
1.
Press MENU then select
2.
Select Add. The Add FIPS Code screen displays.
3.
Enter the FIPS codes for your area (find them on the websites mentioned previously)
and select STORE. The S.A.M.E.FIPS Code screen displays again.
Edit and delete FIPS codes in a similar manner.

Adjusting the Backlight

The backlight LCD function can be set to automatically dim after a set time.
1.
Press MENU then select GENERAL SETUP/Backlight. The Backlight menu displays.
2.
Select Backlight Level and press ▲ or ▼ to adjust the brightness (Off, 1 - 5).
3.
Select Backlight Timeout and press ▲ or ▼ to set the length of time the backlight
RADIO SETUP
and UNLOCK displays.
RADIO SETUP
RADIO SETUP
asp?lang=En&n=E5A4F19C-1.
RADIO SETUP
Uniden MHS335BT Radio Owner's Manual
/Channel Mode. The CHANNEL MODE
/LOCK key. KEY LOCK
/Weather Radio.
screen.
/Weather Radio/S.A.M.E FIPS Code.
RADIO SETUP
/
E-27

Advertisement

Table of Contents
loading

Table of Contents