Table of Contents
Advertisement
PARTS OF THE MICROPHONE
Button
Press to...
(
)
Move up one channel
+
at a time.
Move down one
(
)
-
channel at a time.
1st press: Go to
Channel 16.
2nd press: Go to
16/9-TRI
Channel 9.
3rd press: Go back to
the original channel.
Scan channels.
SCAN/MEM
Cancel scanning and
PUSH TO
stay on a channel.
TALK
TURNING ON THE RADIO
Turn the VOLUME-PWR knob clockwise to turn on the radio. As it powers on, the radio
displays the user MMSI number; if there is no MMSI set, the radio displays MMSI not
entered.
When it powers on, the radio selects the last channel used.
SETTING THE UIC CHANNEL MODE (USA/CAN/INT)
The radio comes preset to use the UIC channels assigned for the United States. If you are
operating in an area that uses Canadian or international UIC channels, you will need to
change the channel mode.
1. Press and hold CALL-MENU to display the normal menu, and choose the Setup sub-
menu.
2. Select USA/CAN/INT. The screen displays the UIC channel setup.
3. Choose the channel mode you want to use: US (USA Mode), Canadian (Canada Mode),
or international (Intl Mode).
4. Press ENT-1W/25W. The radio activates the new channel mode and exits the menu.
Press and hold to...
Move quickly up the
channels.
Move quickly down the
channels.
Go into Triple Watch
or Dual Watch mode
(see page 13).
Save current channel
into memory.
Talk on a channel.
4
Push to Talk
button
16/9 TRI
button
Microphone
SCAN/MEM
button
Channel
UP/DOWN
buttons
Advertisement
Table of Contents
