Specifications - Uniden MHS050-2 Owner's Manual

Problem
The radio won't
transmit.
I can't hear anything
from the speaker.
Noise comes out of the
speaker all the time
I can transmit, but no
one can hear me.
Where can I find my
radio's serial number?

speCiFiCations

General
Channels
Frequency Control
Frequency Tolerance
Operating Temperature -4°F (-20°C) to +122°F (+50°C)
Antenna
Microphone
Display
Speaker
E-18
Things to Try
• Make sure you are not in scan mode.
• Make sure you are not trying to
transmit on a receive-only channel
or transmit at the wrong power level
for this channel (see the channel lists
starting on page E-23).
• Check the battery power level; if it's
low, charge the battery before trying to
transmit.
• Make sure the duration of each
transmission is less than 3 minutes.
Adjust the squelch level; it is probably
too high.
Adjust the squelch level; it is probably
too low.
Check your UIC channel settings: does
the area you are in use different channel
assignments?
The serial number is on a plate inside
the battery compartment.
All US, International, and Canada marine
channels
PLL
Transmit: 1.5 PPM (at 25°C)
Receive: 1.5 PPM (at 25°C)
Flexible Whip
Built-in Electret type
Liquid Crystal Display
16 Ω 0.2 W
Uniden MHS050-2 Owner's Manual