Page 1
MHS335BT FLOATING VHF MARINE RADIO RADIO VHF MARITIME FLOTTANTE OWNER’S MANUAL GUIDE D’UTILISATION...
Page 2
Lift the red cover. Press and hold the MAKING A DISTRESS CALL for three seconds. Your radio transmits Lift the red cover DISTRESS key your ship’s location every few minutes until you and press the white receive a response. DISTRESS button underneath.
Page 3
Soulevez le couvercle noir. Maintenez enfoncé FAIRE UN APPEL DE DÉTRESSE pendant trois secondes. Votre radio transmettra DISTRESS l’emplacement de votre bateau toutes les quelques minutes jusqu’à ce que vous receviez une réponse. Soulevez le couvercle et appuyez sur le bouton DISTRESS blanc en dessous.
Normal ........E-19 INTRODUCTION .......E-3 Scan ........E-20 FEATURES ........E-3 Weather ........E-22 WHAT'S INCLUDED ....E-4 PARTS OF THE MHS335BT ..E-5 SETTING UP THE HARDWARE ....E-23 Front View ......... E-5 Back View ......... E-6 ATTACHING THE ANTENNA ...E-23 Charger ........E-6 INSTALLING THE BATTERY ...E-23...
Page 5
NMEA Output ......E-41 (Individual Call) ....E-33 ADDITIONAL FEATURES ..E-41 Calling a particular group Renaming Channels ....E-41 of ships (Group Call) ... E-33 UNIDEN MARINE APP ...E-42 Calling all ships MAINTENANCE AND (All-Ships Call) ..... E-34 TROUBLESHOOTING ..E-42 MAKING AN AUTOMATIC DISTRESS CALL ....E-34...
Page 6
REGULATIONS AND SAFETY WARNINGS ......E-52 Maritime Radio Services Operation ........E-52 Basic Radio Guidelines ....E-52 RBRC Information ....E-54 COMPLIANCE ......E-54 Three-Year Limited Warranty ......E-55...
MHS335BT INTRODUCTION Uniden's MHS335BT is a floating, hand-held class D DSC radio with an integrated GPS receiver. It is also Bluetooth capable so you can use Uniden's smartphone app (iOS and Android) to set up the radio and text message other VHF text message capable radios.
Not shown: Antenna Lithium Ion 1 meter NMEA Rechargeable Battery cable MHS335 Radio Wrist Strap DC Adapter AC Adapter Mounting Hardware Charging Cradle If any pieces are missing or damaged, contact Customer Service at www.uniden.com. Uniden MHS335BT Radio Owner’s Manual...
LED off. Cycle through call channel, channel 16, channel 9, and 16/P back to the starting channel. Press once: Adjust volume. VOL/SQ Press twice: Adjust squelch. DISTRESS Activate DISTRESS screen. Send out default distress signal. Uniden MHS335BT Radio Owner’s Manual...
This dummy Idle screen displays many of the possible icons. The table below shows possible icons and what they mean. INTL COMMERCIAL LAT:32˚53,6604N LON:096˚59,3158W TIME:20:47 Local DATE:Aug 23,2017 < > CALL Uniden MHS335BT Radio Owner’s Manual...
Number HOW IT WORKS The MHS335BT uses a 3-part operating structure: Menus, Soft Keys, and a pop-up keyboard. These elements work with each other to quickly set up and operate your radio. Menus - Press the MENU key to access the menus (see page E-8).
RADIO SETUP (see page E-11 for details) GPS (see page E-12 for details) WAYPOINT SETUP (see page E-12 for details) BLUETOOTH SETUP (see page E-12 for details) DSC SETUP (see page E-12 for details) ABOUT (see page E-13 for details) Uniden MHS335BT Radio Owner’s Manual...
Page 13
Configure DSC calling and directories. Page E-12 ABOUT Displays radio, GPS, and Bluetooth firmware Page E-13 version numbers. RESET (To Factory Reset the radio to factory defauts. All Page E-13 Defaults) programming is lost, but not the MMSI number. Uniden MHS335BT Radio Owner’s Manual...
Set how dark the screen images are against the background. Contrast levels are 1 - 8 (Default = 4). (See page E-28.) Key Beep With Key Beep turned on (default), the radio will beep every time you press a key. E-10 Uniden MHS335BT Radio Owner’s Manual...
Rename a channel (see page E-41). Noise Cancel Select noise cancelling for received or transmitted signals. Receive Audio Set audio pitch. Pitch - Normal - Mid Range - Highs & Lows Boost - Lows Boost - Highs Boost Uniden MHS335BT Radio Owner’s Manual E-11...
Set an able (or unable) to reply automatic message to be sent. Individual Call Set the amount of time a call will ring before it times out. Ring Auto MOB Set Turn Auto MOB on and off. E-12 Uniden MHS335BT Radio Owner’s Manual...
MOB. The MOB screen displays the latitude, longitude, time, BRG (Bearing to Destination), and DIST (Distance to Destination). The radio’s GPS supplies this information automatically. The soft keys change to BACK, DEL, and NAV. Uniden MHS335BT Radio Owner’s Manual E-13...
ALL SHIPS CALL None Select the CALL soft key and select ALL SHIPS CALL. Select either SAFETY (hazards in the water) or URGENCY (people at risk). E-14 Uniden MHS335BT Radio Owner’s Manual...
Page 19
If you select DELETE LOG, you then have the option of selecting TX Log or RX Log to delete specific entries. Select Delete All Log to delete all entries for both the TX and RX logs. Uniden MHS335BT Radio Owner’s Manual E-15...
(See page E-6 for the MEM icon LCD placement.) SCAN Soft Key The SCAN soft key lets you scan combinations of channels saved into memory and priority channels. Set priority/second priority channels and the channel type through menus. E-16 Uniden MHS335BT Radio Owner’s Manual...
SENDING TEXT MESSAGES NOTE: You can send texts from your radio or from your mobile device using the Uniden Marine app, available for Android and iOS. Select the BT soft key and select New Message. Select an individual contact to receive the message and then SELECT.
Scan memory. scanning. Select - Check a small group of SCAN again to - Monitors all the channels regularly-used channels stop. you save into memory. for traffic. E-18 Uniden MHS335BT Radio Owner’s Manual...
Page 23
Press ▼ to move down one channel at a time. Press and hold the key to scroll quickly down the channels. To change the transmit power, press the HILO soft key. The transmit power cycles through 1W, 2.5W, and 6W, then back to 1W again. Uniden MHS335BT Radio Owner’s Manual E-19...
Page 24
If Weather Alert is turned on with Memory mode, the radio scans through the channels saved into memory and then scans the most recently used Weather channel. (Memory Channel 1 --> Memory Channel 2 --> Memory Channel N, and then scans the most recently used Weather channel. E-20 Uniden MHS335BT Radio Owner’s Manual...
Page 25
Scan Mode with Triple Watch or Dual Watch RADIO SETUP If you activate Triple Watch (MENU/ /Dual/Tri Watch menu or TRI soft key) while operating in Scan mode, the radio checks the priority and second priority channels Uniden MHS335BT Radio Owner’s Manual E-21...
WEATHER MODE WITH WEATHER ALERT WATCH RADIO SETUP If you activate Weather Alert Watch through MENU/ /Weather Radio/WX Alert while operating in Weather mode, it operates as a type of “sleep mode.” The radio stays on E-22 Uniden MHS335BT Radio Owner’s Manual...
(not included). You can use alkaline batteries as a backup for the Li-Ion Polymer battery so you can still use your radio while your Li-Ion Polymer battery is recharging. CAUTION: If you are using your radio in a cold-weather environment, Uniden recommends using non-rechargeable Lithium batteries.
Using a 1/8-inch (or 3 mm) drill bit, drill two holes 1/2 inch (13mm) deep. Use the provided screws to attach the charger to the surface. NOTE: The charger must be mounted at least 2 feet (24 inches) from the compass to prevent magnetic interference with either device. E-24 Uniden MHS335BT Radio Owner’s Manual...
SETTING UP YOUR RADIO TURNING IT ON Press the POWER key for at least two seconds until the UNIDEN splash screen displays. Release the POWER key. Press and hold it to turn the unit off. ENTERING THE USER MMSI When you power up your radio for the first time, it displays MMSI Not Entered and then displays a Marine mode screen.
If you must change your user MMSI, instructions are on the Uniden website (www.uniden.com). if you choose to not enter your specific MMSI number at initial start up, you can still use many of your radio's features. However, you cannot use DSC features.
Press MENU then select GENERAL SETUP/Backlight. The Backlight menu displays. Select Backlight Level and press ▲ or ▼ to adjust the brightness (Off, 1 - 5). Select Backlight Timeout and press ▲ or ▼ to set the length of time the backlight Uniden MHS335BT Radio Owner’s Manual E-27...
1W, 6W, or 2.5W displays. The transmit power remains at the new setting on that channel until you change it again. NOTE: If you try to change transmission power output but the channel is only 1W, the radio sounds an error tone and stays at 1W. E-28 Uniden MHS335BT Radio Owner’s Manual...
Since digital transmissions require less bandwidth voice transmissions, channel 70 avoids the problems of busy voice channels. MMSI NUMBERS In order to use DSC features, you must be assigned an individual User MMSI number and program that number into your radio. Uniden MHS335BT Radio Owner’s Manual E-29...
Entering MMSI Numbers When you turn your MHS335BT on for the first time, you have the option of entering your MMSI number at that point. If you choose not to enter your MMSI number then, you will still be able to use your radio;...
The group's name and MMSI number display. Select which item you want to edit and choose SELECT. Either a popup keyboard displays to edit the group name or the MMSI number displays. When you've finished editing, save your edits. Uniden MHS335BT Radio Owner’s Manual E-31...
You see a rowboat entering the area, but since it doesn’t have a radio, you can’t communicate with the rowboat. You use all ships calling to alert all the other ships in the area of the possible danger E-32 Uniden MHS335BT Radio Owner’s Manual...
Scroll thorugh soft keys to select CALL soft key. CALL menu displays. Select GROUP CALL. A list of groups displays (see page E-31 to create groups). Press ▲ and ▼ to scroll through the list and select the group to call. Uniden MHS335BT Radio Owner’s Manual E-33...
After the timer counts down, another random countdown timer begins unless you take action Pause, Cancel, or Manually Resend). NOTE: If no MMSI number has been programmed, the radio prompts you to enter your MMSI number. E-34 Uniden MHS335BT Radio Owner’s Manual...
Press any key to stop the alarm. The soft keys change to QUIT (return to the Idle screen), PAUSE, and INFO (view longetude, latitude, and time sent information). The radio also changes to the requested working channel. Uniden MHS335BT Radio Owner’s Manual E-35...
Select DSC SETUP/DSC Alarm Setup/Test Call and choose SELECT. Select On for the radio to automatically send an acknowledgement when it receives a test call. Select Off to answer the call manually. The screen returns to the DSC ALARM SETUP menu. Uniden MHS335BT Radio Owner’s Manual E-37...
50 received calls (see page E-36). AUTO POLLING Auto Polling lets you request an automatic position update from up to 7 individuals. You can also send your position automatically to up to 7 individuals. E-38 Uniden MHS335BT Radio Owner’s Manual...
Displays latitude, longitude, and time as well as a map of active satellites within range. (Active satellites display as black dots; inactive satellites display as white dots.) GPS Satellite Signal Displays a list of satellite numbers and signal strength. Uniden MHS335BT Radio Owner’s Manual E-39...
Turn stationary positioning on or off. NMEA FEATURES Your radio supports NMEA 0183 (version 4.10), a standard for data communication between marine instruments. NMEA sentences contain different sets of data related to your ship. The MHS335BT supports the following sentences: DATA UTC Time...
RADIO SETUP Press MENU and select /Channel Name. The screen displays the list of channels with their names. Press ▲ or ▼ to select the channel you want to change and then select RENAME. Uniden MHS335BT Radio Owner’s Manual E-41...
When you are satisfied with the channel list, select BACK to return to the Idle screen. UNIDEN MARINE APP Uniden's Marine Radio app lets you configure your MHS335BT and send text messages from your mobile device. The app is available for iOS and Android. Go to the Apple App store, Google Play, or Amazon to download this free app.
Channel name/description Used for primarily emergency messages and distress DISTRESS SAFETY AND CALLING calls safety messages from one ship to another, or INTERSHIP SAFETY from a ship to Coast Guard aircraft E-44 Uniden MHS335BT Radio Owner’s Manual...
A STATEMENT is a message containing follow up information to a warning, watch, or emergency. Event SAME Code Type Blizzard Warning Warning E-50 Uniden MHS335BT Radio Owner’s Manual...
You should familiarize yourself with the rules on marine radios and be aware of which rules apply ship to your . Complete guidelines for all ship and marine radio types can be found at the US Coast E-52 Uniden MHS335BT Radio Owner’s Manual...
Page 57
Unauthorized changes or modifications to this equipment may void compliance with the FCC Rules. Any change or modification must be approved in writing by Uniden. Changes or modifications not approved by Uniden could void the user’s authority to operate the equipment.
In case of exposure to the cell contents, wash the affected area thoroughly, and seek medical attention. RBRC INFORMATION As part of our commitment to protect the environment and conserve natural resources, Uniden voluntarily participates in an RBRC® industry program to collect and recycle used Li-Ion batteries within the US.
(E) used in any conjunction with equipment or parts or as part of any system not manufactured by Uniden, or (F) installed or programmed by anyone other than as detailed by the Operating Guide for this product.
Page 60
The Product should be shipped freight prepaid, by traceable means, or delivered, to warrantor at: Uniden America Corporation C/O Saddle Creek 743 Henrietta Creek Rd., Suite 100 Roanoke, TX, 76262 E-56 Uniden MHS335BT Radio Owner’s Manual...
Page 64
QUESTIONS? Visit our website at www.uniden.com or call 1-800-297-1023. QUESTIONS? Contactez-nous au www.uniden.com ou appelez 1-800-297-1023. Printed in Vietnam Imprimé au Vietnam Issue 3, January 2019...