Subscribe to Our Youtube Channel
Related Manuals for Shark SJGPG-3016
Summary of Contents for Shark SJGPG-3016
- Page 1 SJGPG-3016 SJGDG-3020 OPERATOR’S MANUAL 89143270-3 MODEL # ORDER # SJGPG-3016 1.107-060.0 SJGDG-3020 1.107-061.0 To locate your local Shark Commercial Pressure Washer Dealer nearest you, visit www.sharkpw.com 8.914-327.0...
-
Page 2: Table Of Contents
The model and serial numbers will be found on a decal attached to the machine. You should record both serial number and date of purchase and keep in a safe place for future reference. SJGPG-3016 & SJGDG-3020 • 8.914-327.0 • REV. 1/12... -
Page 3: Introduction
Shark reserves the right to make changes at any time WARNING: Risk of fire. Do not without incurring any obligation. add fuel when the product is RISK OF FIRE. -
Page 4: Assembly
Connect one end of a garden hose (not included) to 11. Shark will not be liable for any changes made to the water faucet — water supply not to exceed 100 PSI our standard machines, or any components not (6.9 bar) and the other end to the water inlet of the jet... -
Page 5: Component Identification & Use, Drain Cleaning
COMPONENT IDENTIFICATION AND USE DRAIN CLEANING Hose Reel (SJGPG-3016 Only) Spray Wand Tool Box Directional Control Valve Pressure Gauge Unloader Valve Foot Pedal (optional) Pulse Control Valve Engine Engine Anti-Siphon Throttle Valve Drain 89143270-4 SJGPG-3016 & SJGDG-3020 • 8.914-327.0 • REV. 1/12... - Page 6 Hose Line to Foot Pedal on Roof Roof Spray Wand Hose Reel (SJGPG-3016 Only) Tool Box Directional Control Valve Pressure Gauge Unloader Valve Anti-Siphon Valve Engine Pulse 89143270-5 Control Valve Engine Throttle SJGPG-3016 & SJGDG-3020 • 8.914-327.0 • REV. 1/12...
- Page 7 ® Shark Jetters OPERATOR’S MANUAL COMPONENT IDENTIFICATION SJGDG-3020 Float Tank Fuel Tank Pressure Gauge High Pressure Cleaner Outlet On/Off Valve Choke Unloader Valve Throttle Control Electric Start 89143270-3 Pulse Control Oil Filter SJGPG-3016 & SJGDG-3020 • 8.914-327.0 • REV. 1/12...
- Page 8 1/8" hose using bushing part number 9.803-564.0. The SCP-1 foot valve is available that can be used as a safety shut-off valve for all hose sizes. See foot pedal section for installation and operating instructions. SJGPG-3016 & SJGDG-3020 • 8.914-327.0 • REV. 1/12...
-
Page 9: Pre-Operation Checklist
The pulse control valve is located on the front of the ready to use it. pump. Simply turn the valve on to engage the pulse. SJGPG-3016 & SJGDG-3020 • 8.914-327.0 • REV. 1/12... - Page 10 (1/8" or 1/4") to the outlet side of the wand. Turn the nozzle clockwise to reduce the detergent pedal. Use the smaller hose to clear the drain line. flow and narrow the water spray pattern and return to high pressure. SJGPG-3016 & SJGDG-3020 • 8.914-327.0 • REV. 1/12...
-
Page 11: Freeze Protection
When preparing to operate equipment the next time pump; no more than 5 minutes with the SJGPG-3016 capture the anti-freeze in the water tank by placing jetter or SJGDG-3020 pumps. Excessive temperatures will hose with nozzle removed into a customer provided con- damage the pump and void the warranty. - Page 12 * Use SAE 30w non-detergent motor oil to full mark on dipstick or to dot on sight glass. ** Refer to engine manufacturer's specifications for correct oil viscosity when adding to engine oil. SJGPG-3016 & SJGDG-3020 • 8.914-327.0 • REV. 1/12...
-
Page 13: Exploded View Sjgpg-3016
® Shark Jetters OPERATOR’S MANUAL EXPLODED VIEW SJGPG-3016 Reversed View Reversed View Reversed View Detail See Foot Brake Illus. Detergent Injector 89143270-1 SJGPG-3016 & SJGDG-3020 • 8.914-327.0 • REV. 1/12... - Page 14 Hose, 3/8" Push-On 5" ▲ Washer, 5/16" Flat, SAE 8.718-980.0 8.706-818.0 Elbow, 1/4" Female, Brass 8.706-984.0 Adapter 1/2" x 1/2" Pipe 8.707-219.0 Valve, 1/4" Ball, 2 Way, Brass 1 8.911-672.0 Handle, w/Guard SJGPG-3016 & SJGDG-3020 • 8.914-327.0 • REV. 1/12...
-
Page 15: Exploded View, Parts List Sjgpg-3016
Cap, 1" Square Black Plastic 4 8.911-676.0 Bracket, Pump Face Plate 9.804-566.0 Screw, 10-32" x 1/2" Slot Pan MS ZN 8.718-860.0 Nut, 10/32" ESNA, SS 8.911-665.0 Assy, Tool Box, Black 8.750-982.0 Washer, Brass 3/4" SJGPG-3016 & SJGDG-3020 • 8.914-327.0 • REV. 1/12... -
Page 16: Exploded View, Sjgdg-3020
® Shark Jetters OPERATOR’S MANUAL EXPLODED VIEW SJGDG-3020 LEFT SIDE Reversed View Muffler Shroud Detail See View A-A Detail See Foot Brake Assy. Illus. Detergent Injector 89143270-6 SJGPG-3016 & SJGDG-3020 • 8.914-327.0 • REV. 1/12... - Page 17 ® Shark Jetters OPERATOR’S MANUAL EXPLODED VIEW SJGDG-3020 RIGHT SIDE View A-A 89143270-2 SJGPG-3016 & SJGDG-3020 • 8.914-327.0 • REV. 1/12...
-
Page 18: Exploded View Parts List Sjgdg-3020
Elbow, 3/4 SAE x 3/4, w/ASJ Foil, 2 Sides 1.25 SF 90°, Brass 8.717-696.0 Cap Valve w/ 1/4 Gauge Port, 8.706-899.0 Nipple, 3/4 JIC x 3/4 Pipe LX Series 8.707-218.0 Valve, 3/8" Ball, 2-Way, Brass 1 SJGPG-3016 & SJGDG-3020 • 8.914-327.0 • REV. 1/12... - Page 19 8.931-131.0 Bracket, Pump Support, GX 8.904-457.0 Chemical Injector Assy, (Use SJGPG-3016 Bracket that ® Shark Jetter 5-8 GPM comes with Pump) ▲ Not Shown 8.706-832.0 Elbow, 3/4" Street 8.706-800.0 Nipple, 3/4" Hex SJGPG-3016 & SJGDG-3020 • 8.914-327.0 • REV. 1/12...
-
Page 20: Foot Brake Assembly & Parts List
Screw, 3/8" x 2", Whiz Loc 9.802-768.0 Screw, 3/8" x 1-1/4", Whiz Loc 2 ▲ Nut, 3/8" ESNA 8.725-395.0 ▲ Washer, 3/8" Wave 8.719-018.0 8.725-394.0 Washer, 3/8" SAE, Flat 9.802-781.0 Nut, 3/8", Flange, Whiz Loc SJGPG-3016 & SJGDG-3020 • 8.914-327.0 • REV. 1/12... -
Page 21: Shr-200Cp Hose Reel, Exploded View & Parts List
8.718-640.0 Bolt, 5/16" x 6-1/2" HH, NC 8.711-866.0 Hose Reel, 13" 9.802-069.0 Grip, 1" Handle, Waffle 8.711-874.0 Swivel, 3/8" x 3/8" 8.940-343.0 Label, Discharge 9.803-551.0 Screw, 5/16" x 3/4" Whiz Loc 7 SJGPG-3016 & SJGDG-3020 • 8.914-327.0 • REV. 1/12... -
Page 22: Shr-300 Hose Reel, Exploded View & Parts List
Hose, 3/8" x 23", 1 Wire 8.706-690.0 Cover, Handle, LG 3/8" SMNPT x 3/8" SWMNPT 1 8.706-294.0 Bushing, 1/2" x 3/8", Steel 8.707-204.0 Valve, 3/8" Ball, Steel 9.802-069.0 Grip, 1" Handle, Waffle SJGPG-3016 & SJGDG-3020 • 8.914-327.0 • REV. 1/12... -
Page 23: Hose And Spray Gun Assembly & Parts List
8.711-436.0 Nozzle Only, 1/4" MEG 2509 8.707-182.0 Coupler, 3/8" Female (SJGDG-3020) Screw-Type 7640 8.711-408.0 Nozzle Only, SA, 1/4" Meg-2506 (SJGPG-3016) 8.711-457.0 Nozzle Only, H-1/4"-U-6540, VEEJET (SJGDG-3020) 8.711-457.0 Nozzle Only, H-1/4-U-6540, VeeJet (SJGPG-3016) SJGPG-3016 & SJGDG-3020 • 8.914-327.0 • REV. 1/12... -
Page 24: Pump, Ts-2021 Exploded View
® Shark Jetters OPERATOR’S MANUAL PUMP MODEL NO. TS-2021 #8.715-337.0 EXPLODED VIEW Pressure Packing Restop High Pressure Packing SJGPG-3016 & SJGDG-3020 • 8.914-327.0 • REV. 1/12... -
Page 25: Pump, Ts-2021 Parts List & Specifications
1-0069 Assembly 4, 5, 6, 7, 9, 10 31, 34, 36, 44, 56 42, 43, 44, 45, 44, 47, 56 (Pos. #) 8, 11 37, 38 46, 47, 56 # of Assemblies SJGPG-3016 & SJGDG-3020 • 8.914-327.0 • REV. 1/12... -
Page 26: Pump Gx8030R Exploded View
® Shark Jetters OPERATOR’S MANUAL LEGACY GX 8030R PUMP #8.904-962.0 EXPLODED VIEW TORQUE SPECS ITEM # FT. LBS. SJGPG-3016 & SJGDG-3020 • 8.914-327.0 • REV. 1/12... -
Page 27: Pump Gx8030R Exploded View Parts List
25 mm 25 mm Complete Valve Seals Items Numbers 35, 36, 37, 38, 39, 4, 5, 7 4, 5, 6, 7, 8 12, 13, 14 Included Number Of Cylinders Kit Will Service SJGPG-3016 & SJGDG-3020 • 8.914-327.0 • REV. 1/12... -
Page 28: Injector Screw Coupler & Parts List
Plug, 3/8" Screw Type Coupler 7642 8.709-418.0 Injector, Detergent Adj., 3/8" M x M, 3-5 GPM (SJGPG-3016) 8.904-194.0 Injector, Detergent, Adj. 5-8 GPM (SJGDG-3020) 8.707-182.0 Coupler, 3/8" Female Screw Type 7640 8.707-057.0 Strainer, 1/4" SJGPG-3016 & SJGDG-3020 • 8.914-327.0 • REV. 1/12... -
Page 29: Troubleshooting
Hot water in pump Do not run in bypass for more than 5 min- utes. Do not let water supply exceed 140°F (60°C). IRREGULAR Worn or partially clogged nozzle Clean or replace nozzles. SPRAY PATTERN SJGPG-3016 & SJGDG-3020 • 8.914-327.0 • REV. 1/12... - Page 30 Nozzle worn or wrong size Replace part as necessary. PRESSURE Piston or valve worn Replace part as necessary. EXTREME PRESSURE Adjusting nut turned completely into Back off adjusting nut. SPIKES unloader Clogged nozzle Clean or replace SJGPG-3016 & SJGDG-3020 • 8.914-327.0 • REV. 1/12...
-
Page 31: Warranty
Dealer or other sales or service outlet to another purchaser. Shark products that are sold by any distributor or retailer that is not an official authorized dealer or retailer of Shark products. Defects caused by acts of nature and disaster including, but not limited to, floods, fires, wind, freezing, earthquakes, tornadoes, hurricanes and lightning strikes. - Page 32 ® SHARK JETTERS SJGPG-3016 & SJGDG-3020 • 8.914-327.0 • REV. 1/12...
Need help?
Do you have a question about the SJGPG-3016 and is the answer not in the manual?
Questions and answers