Shark SGP-3020 Operator's Manual
  1. Manuals
  2. Brands
  3. Shark Manuals
  4. Pressure Washer
  5. SGP-3020
  6. Operator's manual

Shark SGP-3020 Operator's Manual

Sgp series
Hide thumbs Also See for SGP-3020:
Table of Contents

Advertisement

Quick Links

See also: Operator's Manual
OPERATOR'S MANUAL
 SGP-3020
 SGP-3530
®
For technical assistance or the SHARK dealer nearest you
 SGP-3025
 SGP-3530E
visit our website at www.shark-pw.com
SGP
 SGP-3030
 SGP-4035E
97-6132

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SGP-3020 and is the answer not in the manual?

Questions and answers

Related Manuals for Shark SGP-3020

Summary of Contents for Shark SGP-3020

  • Page 1 OPERATOR’S MANUAL  SGP-3020  SGP-3025  SGP-3030  SGP-3530  SGP-3530E  SGP-4035E ® For technical assistance or the SHARK dealer nearest you visit our website at www.shark-pw.com 97-6132...
  • Page 2 CONTENTS Shark SGP • 97-6132 • REV. 2/06...

  • Page 3: Table Of Contents

    The model and serial numbers will be found on a decal attached to the pres- sure washer. You should record both serial number and date of purchase and keep in a safe place for future reference. Shark SGP • 97-6132 • REV. 2/06...

  • Page 4: Introduction & Important Safety Instructions

    This machine is to be used only by trained operators. hIGh PRESSURE CAUTION: Hot discharge fluid. STREAM CAN PIERCE Do not touch or direct discharge SkIN ANd TISSUES. stream at persons. Shark SGP • 97-6132 • REV. 2/06...

  • Page 5: Important Safety Information

    17. Inlet water must be from a cold, clean fresh city water supply. 30. CAUTION: Moving this machine on a slope causes instability and may result in machines tipping over. Use lifting bar provided on the center top of frame. Shark SGP • 97-6132 • REV. 2/06...

  • Page 6: Component Identification

    Note: If trigger on spray gun is released for more than 2 minutes, water will leak from valve. Warm water will discharge from pump protector onto floor. This system prevents internal pump dam- age. Shark SGP • 97-6132 • REV. 2/06...

  • Page 7: Assembly Instructions

    Use 30 wt. non detergent oil. Garden hose Pump Water Inlet STEP7: Connect the garden hose to pump water inlet. Inspect inlets. CAUTION: Do not run the pump without water or pump damage will result. Shark SGP • 97-6132 • REV. 2/06...

  • Page 8: Operating Instructions

    Push the choke lever to the "Closed" When the engine is not in use, leave the fuel valve in position. To restart a warm engine, leave the choke the "OFF" position. lever in the "Open" position. Shark SGP • 97-6132 • REV. 2/06...
  • Page 9 Selection of high or low pressure is accompanied by turning the handle. apply detergent select the black Note: High pressure nozzle must be inserted at end of wand to obtain nozzle. high pressure. To apply soap read operator's manual. Shark SGP • 97-6132 • REV. 2/06...

  • Page 10: Detergents And Cleaning Tips

    Apply safety latch to spray gun. Remove black soap for 1-2 minutes. nozzle from the quick coupler. Select and install the desired high pressure nozzle. NOTE: You can also stop detergent from flowing by simply removing detergent siphon tube from bottle. Shark SGP • 97-6132 • REV. 2/06...

  • Page 11: Shut-Down And Clean Up

    3. Pour about one teaspoon of engine oil through the gine manufacturer's manual for service and maintenance spark plug hole, pull the starter grip several times and replace the plug. Then pull the starter grip slowly of the engine. Shark SGP • 97-6132 • REV. 2/06...

  • Page 12: Maintenance

    Reinstall wand assembly to spray Damage due to freezing is not covered by warranty. gun. Adhere to the following cold weather procedures when- ever the washer must be stored or operated outdoors under freezing conditions. Shark SGP • 97-6132 • REV. 2/06...

  • Page 13: Rupture Disk

    Adjustment 5/32" Electrode Screw Pressure Adjustment Screw Return Line 7-00098 Fuel Pump 1/4" To Fuel Nozzle Tank 5/32" Top View Side View Periodically check wiring connections. If necessary to adjust electrodes, use diagram. Shark SGP • 97-6132 • REV. 2/06...
  • Page 14 3. Lift the coil out of the outer wrap. CAUTION: The coil weighs about 80 lbs. Use proper lifting techniques. 4. Clean, repair and replace the coil by reversing the above steps. Shark SGP • 97-6132 • REV. 2/06...

  • Page 15: Troubleshooting

    12V DC relay defective Test and replace. Fuel is not reaching combustion Check fuel pump for proper flow. Check chamber solenoid flow switch on machines with spray gun control for proper on-off flow control. Shark SGP • 97-6132 • REV. 2/06...
  • Page 16 Oil seal is worn Check and replace if necessary. WATER IN OIL Air humidity is high Check and change oil twice as often. Packing is worn or bad Check and replace if necessary. Shark SGP • 97-6132 • REV. 2/06...

  • Page 17: Troubleshooting

    Control switch is defective Replace switch. There is a loose wire Check and replace or tighten wiring. Burner motor is defective Replace motor. RELIEF VALVE Relief valve is defective Replace or repair relief valve. LEAkS WATER Shark SGP • 97-6132 • REV. 2/06...

  • Page 18: Maintenance & Oil Change Charts

    Annually (if there are any signs of wear) OIL CHANGE RECORD NO. OF OPERATING NO. OF OPERATING dATE OIL ChANGEd hOURS SINCE dATE OIL ChANGEd hOURS SINCE MONTh/dAY/YEAR LAST OIL ChANGE MONTh/dAY/YEAR LAST OIL ChANGE Shark SGP • 97-6132 • REV. 2/06...

  • Page 19: Exploded View- 3020, 3025

    ExPLOdEd VIEW - 3020, 3025 MOdELS For brake detail See View A-A For detail Control box Illus. 51,105,106 Regulator (Reversed View) Shark SGP • 97-6132 • REV. 2/06...

  • Page 20: Exploded View- 3030, 3530, 3530E, 4030E

    ExPLOdEd VIEW - 3030, 3530, 3530E, 4030E MOdELS HOT WATER OUTLET SALIDA DEL AGUA CALIENTE SORTIE D'EAU CHAUDE Detail See Control Box Illus. Reversed View of Component For Brake Honda Electric Detail See Start Only View A-A (Enlarged) Shark SGP • 97-6132 • REV. 2/06...
  • Page 21 ExPLOdEd VIEW - 3030, 3530, 3530E, 4030E MOdELS Shark SGP • 97-6132 • REV. 2/06...

  • Page 22: Exploded View Parts Lists

    11 HP E/S, 18 AMP (3530E) 2-010532 Mount, Rubber Vibration, 3/8" 5-01070 Engine, Honda, GX340QAH2, 70 Duro (3030, 3530, 3530E, 11 HP, 18 AMP (3530) 4035E) 5-010720 Engine, Honda, GX390KQNR2, 13 HP E/S, 18 Amp (4035E) Shark SGP • 97-6132 • REV. 2/06...
  • Page 23 Nut, Cage, 1/4" x 16 Gauge (3030, 3530E, 3530, 4035E) 6-01041 Service Cord, 12/3 Jr. (3030, (3020, 3525) 3530, 3530E, 4035E) 40" (3020, 3025) 32" 6-0516 Strain Relief, 1/2" 90-1018 Bolt, 3/8" x 1-1/2" Shark SGP • 97-6132 • REV. 2/06...
  • Page 24 (3020, 3025, 3030, 3530) 90-1994 Screw, 10/32" x 1-1/4" RH SL (3530E, 4035E) 90-017 Nut, 10/32" Kep (3530E, 4035E) (3020, 3025, 3030, 3530) 2-10866 Hose Barb, 1/4" Barb x 3/8", Double 2-010061 Bushing, Rubber Nitrile Shark SGP • 97-6132 • REV. 2/06...

  • Page 25: Control Panel- 3020, 3025 & Parts List

    Screw, 10/32" x 1-1/4" 90-19711 Screw, 1/4" x 1/2" HH NC, (Ground) Whiz Loc 90-017 Nut, 10/32", KEPS 90-200012 Nut, 1/4" Whiz Loc 11-1042 Ground Label 90-2000 Nut, 1/4", ESNA, NC  Not Shown Shark SGP • 97-6132 • REV. 2/06...
  • Page 26 CONTROL PANEL - 3030, 3530, 3530E, 4035E MOdELS 1, 23 Shark SGP • 97-6132 • REV. 2/06...

  • Page 27: Control Panel- 3030, 3530, 3530E, 4030E & Parts List

    Screw, 10/32" x 3/4", HEX 90-2006 Nut, 5/16" Hex 2-011681 Cap, Capacitor, 1.37 x 1.5 x .06 6-0611 Rectifier, Bridge (3530E, Blk, w/o Hole (3030, 3530) 4035E) 90-132 Screw, 6/32" x 5/8" (3030,3530)1  Not Shown Shark SGP • 97-6132 • REV. 2/06...

  • Page 28: Hose & Spray Gun Assembly

    (3030, 3530, 3530E, 4035E) (3030) 4-011183 Detergent Injector Assy #2 4-12803025 Nozzle SAQMEG 2503, Green (3020, 3025) (3030) 4-12803040 Nozzle SAQMEG 4003, White (3030) 4-12803000 Nozzle SAQMEG 0003, Red (3030)  Not Shown Shark SGP • 97-6132 • REV. 2/06...

  • Page 29: Downstream Injector Assembly

    3-12021 Injector, Detergent, Non-Adjust #3, (4-011184) 3-1202 Injector, Detergent, Non-Adjust #2, (4-011183) 2-9040 Clamp, Hose, UNI .46 - .54 4-02080000 Tube, 1/4" x 1/2", Clear Vinyl 6 ft. 2-1904 Strainer, 1/4", Hose Barb Shark SGP • 97-6132 • REV. 2/06...

  • Page 30: Burner Specifications

    7-578727 303037 7-00031 7-01215 7-515242 7-21699 7-00098 7-21754U 7-578727 353037 7-00031 7-0101 7-515242 7-21699 7-00098 7-21754U 7-578727 353037E 7-00031 7-0101 7-515242 7-21699 7-00098 7-21754U 7-578727 403537E 7-00031 7-0102 7-515242 7-21699 7-00098 7-21754U 7-578727 Shark SGP • 97-6132 • REV. 2/06...

  • Page 31: Hose Reel Option

    Loop 4-02755030 Hose Reel, 100' Non-Pivot, E-ZEE w/Pin Lock 90-1996 Screw, 3/" x 3/4" HH NC, Whiz 90-20040 Nut, 3/8" Flange, Whiz Loc, NC 4 95-072900901 Bracket, E-ZEE Hose Reel Right, Wrinkle Black Shark SGP • 97-6132 • REV. 2/06...

  • Page 32: Vba35 Unloader Exploded View And Parts List

    70-140734 Connector 70-000918 Teflon Ring kit A 70-262813 O-Ring Repair Kit 70-120611 Stem kit b 70-262814 Outlet Kit 70-140702 Connector, Female kit C 70-262815 Stem Repair Kit 70-060119 O-Ring A, B 70-090004 Spring Shark SGP • 97-6132 • REV. 2/06...

  • Page 33: Gg Pump Exploded View And Parts List

    O-Ring 3.53 x 55.56 70-060122 O-Ring Ø2.62 x 18.77 70-020011 Needle Roller Bearing 70-160147 Valve Plug 70-050096 Engine Flange 70-060308 Washer, Copper 70-140002 Spring Washer 70-160121 Brass Plug G1/4 70-180126 Flange Screw 70-180118 Manifold Stud Bolt Shark SGP • 97-6132 • REV. 2/06...
  • Page 34 Seal Packing 15mm Plunger 15mm Complete Valve Seals ITEM NUMBERS 2, 3, 4, 5, 38, 39, 40, 3, 5, 6 11, 12, 13 INCLUDED 6, 7 41, 42 NUMBER OF CYLINDERS KIT WILL SERVICE Shark SGP • 97-6132 • REV. 2/06...
  • Page 35 FITNESS FOR A PARTICULAR PURPOSE. SHARK does not authorize any other party, including authorized Dealers, to make any representation or promise on behalf of SHARK, or to modify the terms, conditions, or limitations in any way. It is the buyer’s responsibility to ensure that the installation and use of SHARK products conforms to local codes. While SHARK attempts to assure that its products meet national codes, it cannot be responsible for how the customer chooses to use or install the product.
  • Page 36 Form #97-6132 • Revised 2/06 • Printed in U.S.A.

This manual is also suitable for:

Sgp-3025Sgp-3530eSgp-4035eSgp-3030Sgp-3530

Table of Contents