Pioneer CLD-V5000 Programmer's Reference Manual page 75

Interface Cable Specifications
Connecting the CLD-V5000 to Macintosh and Apple II Computers
The CLD-V5000 uses the following cables to attach to the computers listed below:
Computer
Macintosh Plus, SE, II
Apple II, II+, IIE with
Pin Configurations for Specific Cables
CC-03
DB-15 male to DB-25 male
LD Player
GND 1
TxD 2
RxD 3
DTR 4
Conn. Housing
The CC-03 is an RS-232C cable which interfaces Pioneer's
CLD-V5000, CLD-V2800, CLD-V2600, CLD-V2400, LD-V4400,
LD-V8000, LD-V4200, LD-V2200 videodisc players and the
LC-V330 AutoChanger to the IBM InfoWindow*, the Apple II
series Super Serial Card and to Pioneer's UC-V102 Videodisc
Controller. Note: With a 25 pin female-to-female adapter, the CC-
03 can be used to connect the players to an IBM PC or compatible
that supports a 25 pin RS-232C port.
*IBM InfoWindow does not support the LC-V330 AutoChanger.
B-2
TP 121 v. 1.0 • 1/96
& Apple IIGS
Super Serial Card
Computer
7 GND
3 RxD
2 TxD
5 CTS
6 DSR
Conn. Housing
Shield
Appendix B CLD-V5000 Interface Cable Specifications
Pioneer Cable #
CC - 04
CC - 03
CC-04
DB-15 male to Mini-Din 8 male
LD Player
GND 1
TxD 2
RxD 3
DTR 4
Conn. Housing
The CC-04 is an RS-232C cable which interfaces Pioneer's
CLD-V5000, CLD-V2800, CLD-V2600, CLD-V2400, LD-V4400,
LD-V8000, LD-V4200, LD-V2200 videodisc players and the
LC-V330 AutoChanger to the Macintosh Plus, SE, Macintosh
IIs, and Apple II GS computers. It connects the 15-pin RS-232C
port on the player to the Circular-8 Modem port on the Apple
Macintosh.
Connection
DB-15 male to Mini-Din 8 male
DB-15 male to DB-25 male
Computer
4 Frame Ground
8 RxD +
5 RxD -
3 TxD -
1 HS OUT
Conn. Housing
Shield