Pioneer CLD-V5000 Programmer's Reference Manual page 65

Chapter Three • CLD-V5000 Level III
3.7.9 Other Command
57) Picture Stop Disable
Function: Enables or disables picture stops encoded on a CAV LaserDisc.
Format: Integer PS
Explanation: The default is picture stop enabled (0PS). By sending a1PS
command, however, picture stops can be disabled or over-ridden
so the disc can be played through without interruption.
Execution: * Picture Stops are enabled
1PS <C/R>
* Picture stops are disabled and the player plays through the
video material without holding a still frame at the picture stops
encoded on a CAV disc.
0PS <C/R>
* Picture stops are enabled and the player stops at the picture
stops encoded on a CAV disc until another motion command is
sent to the player.
NOTE: Picture stops are encoded on CAV discs only, by request.
Picture stops cannot be encoded on CLV discs.
CLD-V5000 Level III User's Manual
TP 121 v. 1.1 • 3/96
3-49