Operating Modes - Pioneer CLD-V5000 Programmer's Reference Manual

Chapter Two • CLD-V5000 Level II
P O W E R — O N
Figure 2-A
The player is in Door Open before the disc is loaded into the disc tray. After the door
is closed, the player enters Park. When a START or PLAY command is input while
the player is in Park, the disc starts rotating and the player enters Spin Up. When
the player is ready to play images, it enters Random Access. Random Access is
further divided into Play, Still, Scan, Pause, Multi-Speed, Skip (Chapter and Track)
and Search.
When a REJECT command is received, the player enters Spin Down Mode. Image
playback stops immediately, and disc rotation is gradually stopped, then the player
enters Park. Figure 2-B, describes how the active states change within the player.
Transitions Between Active States
DOOR OPEN
RANDOM ACCESS
PLAY
MULTI-SPEED
Figure 2-B
2-2

Operating Modes

Normal Control Mode
Front Panel Buttons
Remote Control
LaserBarcode Control
OPEN
CLOSE
SPIN UP
STILL
SKIP
(Chapter/Track)
TP 121 v. 1.0 • 1/96
Test Mode
Turn ON (1) Bit 7 of Reg C. Not required
for normal player operation; used
primarily by service center personnel for
servicing the player.
REG. C
BIT 7=1
using
R S — 2 3 2 C
PARK
SPIN DOWN
SCAN
SEARCH
CLD-V5000 Level III User's Manual
REG. C
BIT 7=0
PAUSE