Pioneer CLD-V5000 Programmer's Reference Manual page 59

48) REGISTER E SET
Function: Changes the current setting of Register E. (Repeat)
Format: Integer
Explanation: When power is turned ON, and SW 4 is set ON/DOWN, the Repeat
Function of Register E is set to 1/ON. When Switch 5 is ON/DOWN
the Both Sides Function of Register E is set to 1/ON. Register E
sets the Repeat Mode, as follows: To set the Function ON, input the
value indicated by the Integer. To set several, add up the Integers.
Integer
16
32
64
128
Figure 3-V
Repeat Mode
Stops after playing back one side
Stops after playing back both sides
One-Side Repeat
Both-Sides Repeat
Figure 3-W
Execution: * Initial value 0
2 R E <C/R>
* Repeat is OFF, Both-side playback is ON.
NOTE: When Repeat Mode is changed using the REPEAT key of the Remote
Control Unit or Front Panel, the contents of Register E change as follows:
Screen Display
All Repeat
Side Repeat
Chapter Repeat
Auto Return
Also: The Repeat of Register C and that of Register E are always linked. Each
changes according to any change in the contents of the other.
CLD-V5000 Level III User's Manual
CLD-V5000 Level III • Chapter Three
LD/CD
R E
Function
1 Repeat
2 Both Sides
4 (Not Used)
8 (Not Used)
(Not Used)
(Not Used)
(Not Used)
(Not Used)
TP 121 v. 1.0 • 1/96
Repeat
OFF
OFF
ON
ON
R <C/R>
RegisterE Contents
00000011
00000001
00000001
000000X0
1 0
ON OFF
ON OFF
Both Sides
OFF
ON
OFF
ON
3-43