Customizing Tool Buttons - Wacom CINTIQ 21UX Manual

Customizing tool buttons

Select the P tab to change the functions assigned to the side switches and tip of your Cintiq pen.
EN
Each tool button can be set to simulate a variety of mouse functions; the pull-down menus enable you to
choose the function that will be performed.
Double-click here to change the
function assigned to the pen tip.
• At least one tool button
should be set to the C
function.
• The tip must be set to C
in order to draw in most
graphics applications.
C
LICK
Note: For the precise placement of right- and middle-clicks, you can
LICK
enable the S
at the bottom of the control panel to display the O
(S
IDE
C
I
ONTENTS
NDEX
Returns the tab settings to their
factory default conditions.
S E
IDE WITCH XPERT
S E M is the default setting on Tablet PCs.)
WITCH XPERT ODE
I
ONTENTS NDEX
Select the button function
perform when pressing the
upper or lower side switch.
When you bring the pen tip
within 5 mm (0.20 inch) of the
tablet surface without touching
the tablet and press the upper or
lower side switch, the selected
function occurs.
Hint: To make double-clicking
easier, set the side switch to
double-click automatically by
selecting D C
OUBLE LICK
M . Select the O
ODE PTIONS
dialog box.
PTIONS
C
USTOMIZING
12
to
.
... button
12