CUSTOMIZING TOOL BUTTONS
Select the P
tab to change the functions assigned to the side switches and tip of your Cintiq pen.
EN
Each tool button can be set to simulate a variety of mouse functions; the pull-down menus enable you to
choose the function that will be performed.
Double-click here to change the
function assigned to the pen tip.
•
At least one tool button
should be set to the C
function.
•
The tip must be set to C
in order to draw in most
graphics applications.
Note: You can change the S
best fit the way you like to use the pen when
making right-clicks or other click functions.
To access the S
S
IDE
WITCH
the O
... button at the bottom of the control
PTIONS
panel. In the O
dialog box that appears:
PTIONS
•
Select H
C
OVER
LICK
without touching the pen tip to the tablet
surface.
•
When C
& T
is selected, you must press
LICK
AP
the side switch while touching the pen tip to
the tablet surface in order to perform a click
function. C
& T
LICK
placement of your click functions, and is the
default setting for Tablet PCs.
Contents
Returns the tab settings to their
factory default conditions.
LICK
LICK
S
M
to
IDE
WITCH
ODE
M
settings, click on
ODE
to perform click functions
enables the precise
AP
Contents
Index
Index
Select the button function to
perform when pressing the upper
or lower side switch.
When you bring the pen tip within
5 mm (0.20 inch) of the tablet
surface without touching the tablet
and press the upper or lower side
switch, the selected function
occurs.
Hint: To make double-clicking
easier, set the side switch to
double-click automatically by
selecting D
C
.
OUBLE
LICK
12
12