Table of Contents
Advertisement
English
3. Pass the cable for the DM-D500 through the base as shown in
illustration 8.
4. Insert the tab on the base into the hole on the support as shown
in illustration 9 until you feel it click.
5. Connect the cable for the DM-D500 to the DM connector on the
IR Series as shown in illustration 10.
8
Attaching to the TM-H5000II or TM-J8000
The DM-D500 can be attached directly to a TM-H5000II or
TM-J8000 printer using the "DM-D pole unit for TM printers
(Type B)" (DP-503).
Required items
The items shown in illustration 11 are used to attach the DM-D500
to a TM-H5000II or TM-J8000 printer. These items are packed with
the "DM-D pole unit for TM printers (Type B)" (DP-503).
11
base
6 DM-D500 Installation Guide
9
fixing screws
10
support C
support B
(for extension)
Advertisement
Table of Contents
