Table of Contents
Advertisement
Required items
The items shown in illustration 45 are used to attach a DM-D500 to
a TM-T88II, TM-U210, TM-U230, TM-T90, or TM-L90 printer. These
items are packed with the "DM-D pole unit for TM printers"
(DP-505).
45
support
fixing screws for
wooden position
Assembling
Before assembling this product, you must install the UB-S09 in the
TM printer. See the UB-S09 installation manual for the installation
instructions.
Assembling using Velcro tapes
1. Make sure both the printer and the host computer are
turned off.
2. Disconnect the DC cable from the printer.
You must disconnect the power supply because electrical
current is flowing in some parts of the printer circuit even when
the power switch is turned off; otherwise, you may damage the
UB-S09 and the printer.
When disconnecting the DC cable, hold the plug firmly. Do not
tug on the cord itself.
extension
support
CAUTION:
fixing plate
Velcro tapes
(square type)
DM-D500 Installation Guide 15
English
installation
manual
Velcro tape
(round type)
Advertisement
Table of Contents
