Table of Contents
Advertisement
Assembling
1. Pass the cable for the DM-D500 through support C, and attach
support C to the DM-D500 as shown in illustration 21. When
using support B for extension, insert the tab on support B into
the hole on support C as shown in illustration 22 until you feel
it click.
2. Attach the rubber feet to the printer as shown in illustration 23
or 24.
23
[TM-U375]
3. Pass the cable for the
DM-D500 through the
hole on fixing plate A,
and fix the cable at the
bottom as shown in
illustration 25.
21
[TM-U950]
22
when using support B
for extension
24
25
DM-D500 Installation Guide 9
English
Advertisement
Table of Contents
