Epson B113111 - DM D500 - Vacuum Fluorescent Display Character Installation Manual page 16

English
Note:
The roll paper cover may not open if the position of the display is not
correct. Before securing the position of the display, make sure that you
can open the roll paper cover. See illustration 42.
8. Store any excess cable in the support, and attach the DM-D500
to fixing plate A as shown in illustration 43.
42
roll paper cover
9. Connect the power cable
of the printer. To avoid
disconnection, hook the
cable to the tabs on fixing
plate B, as shown in
illustration 44.
Attaching to the TM-T88II, TM-U210, TM-U230, TM-T90, or
TM-L90
The DM-D500 can be attached to a TM-T88II, TM-U210, TM-U230,
TM-T90, or TM-L90 printer using the "DM-D pole unit for TM
printers" (DP-505).
14 DM-D500 Installation Guide
43
44