Advertisement
Quick Links
41215-12
SAND
12 X 15 SOLARIUM
ASSEMBLY INSTRUCTIONS
DO NOT DESTROY THE BOXES UNTIL COMPLETELY ASSEMBLED
FOR FUTURE REFERENCE,
TAKE PICTURES OF ALL SIX SIDES OF EACH OF THE BOXES UPON RECEIPT.
PLEASE VERIFY THE CONTENT OF EACH BOX AGAINST THE LIST OF PARTS
Three adults required for assembly
Base Dimensions 12' ½"x15'6",
Largest Dimensions 13'6"x16'11"
APPROX.
Overall Height 110''
(see pg.17)
ZZZ-183.41215-12.0324-22.GP.EN
TAP-OO 1
Advertisement
Related Manuals for Gazebo penguin 41215-12 SAND
Summary of Contents for Gazebo penguin 41215-12 SAND
- Page 1 41215-12 SAND 12 X 15 SOLARIUM ASSEMBLY INSTRUCTIONS DO NOT DESTROY THE BOXES UNTIL COMPLETELY ASSEMBLED FOR FUTURE REFERENCE, TAKE PICTURES OF ALL SIX SIDES OF EACH OF THE BOXES UPON RECEIPT. PLEASE VERIFY THE CONTENT OF EACH BOX AGAINST THE LIST OF PARTS Three adults required for assembly Base Dimensions 12’...
- Page 2 Some jurisdictions may require permits for, or otherwise regulate, installation and use. For assistance with assembly, installation, parts, or customer service, contact Gazebo Penguin Customer Service Department at the numbers listed below (English & French, Mon-Fri 8:00 AM to 4:00 PM EST):...
- Page 3 Carefully inspect the contents of the carton for missing or damaged components. Should you discover damaged or missing parts, do not return the product to the place of purchase, but contact Gazebo Penguin Customer Service Department at the numbers listed below:...
- Page 4 Before you assemble the Solarium • Please don't destroy boxes until completely assembled. • For future reference, take pictures of all six sides of each of the boxes upon receipt. • Please verify the content of each box against the list of parts. Tools needed: •...
- Page 5 12x15 Solarium Assembly Instructions Step 1: Before starting to assemble, please decide where you would like to position the door panels. Stand up two regular frames (A), using two connecting pieces (E) and affix the panels (A) together. Stand up a frame meant to be next to the door (B) and a door frame (D), placing the door frame either on the left or right, then use two connecting pieces (E) to affix the panel and door frame.
- Page 6 Step 2: 1. Slide top door rail (F) into wheels of sliding door. 2. Slide lower door rail (G) into the plastic guide of the sliding door (C). 3. Use bold (Bb) to affix the plastic stoppers (H) one on each end of top door rail (F). 4.
- Page 7 Step 4: 1. Attach roof rafters (L) to the central hub (N) using bolt (Bb). 2. Use screw (Z) to affix the rafters (L) onto the top of panels going through the metal piece attached to the rafter (L). Note: Rafters must be affixed where panels connect to each other. Step 5: Use the same method to assemble roof rafters (K) for the angled panels.
- Page 8 Step 6: Use nut (Hh) and washer (Gg) to affix the top cap (M) to the central hub (N). Step 7: First remove the protective layer from the PC roof panels, then insert them (Y, Aa, Ll, Qq) into the roof rafters according to the below drawing instructions.
- Page 9 Step 8: After inserting the upper PC panels, insert the aluminum middle roof joints (O, P, Q, Pp) into the roof rafters. The below drawing view is from inside the solarium looking up. Note: • The drain holes on the aluminum middle roof joints (O, P, Q, Pp) should be at the bottom. •...
- Page 10 Step 10: Once the PC roof is complete, use aluminum edging ( S, U, W, Ss) to surround the edges of PC roof, and using bolt (Bb) and roof joint (R), tighten securely. Step 11: Once the installation of the edging complete, start affixing the roof cross bars (T, V, X, Tt) using bolt (Ff). Affix the top cross bars (Uu) onto the roof rafter (L) using bolt (Ff).
- Page 11 Step 12: Inside each of the panels (A, B), push two plastic plugs (Ii) into the ground, and then screw down the panels using two screws (Ee) for each panels. Special notes: 1. To remove windows (08-219), pull 1 pin out of the lock position and push the frame to the end of the track, then ease the window out of the tracks one side at a time.
- Page 12 Suggestions The below mentioned are only suggestions in order to permit drainage, these will vary depending on your flooring – material, flatness and slope. ZZZ-183.41215-12.0324-22.GP.EN TAP-OO 12...
- Page 13 12X15 Solarium PACKED PACKED DESCRIPTION DRAWING DESCRIPTION DRAWING IN BOX IN BOX 08-130-12 08-129-12 FRAME NEXT REGULAR TO DOOR B FRAME (with extra holes) 08-131-12 08-132-12 SLIDING SLIDING DOOR DOOR FRAME 08-133-12 08-136-12 CONNECTING TOP DOOR PIECE RAIL Length 206 cm Length 200.6 cm 08-137-12 08-138-12...
- Page 14 PACKED PACKED DESCRIPTION DRAWING DESCRIPTION DRAWING IN BOX IN BOX 08-147-12 08-148-12 MIDDLE ROOF ROOF JOINT RAFTER CAP 08-150-12 08-149-12 ROOF CROSS EDGING Length 120.6 cm Length 94.4 cm 08-152-12 08-151-12 ROOF CROSS EDGING Length 120.6 cm Length 94.4 cm 08-154-12 08-153-12 ROOF CROSS...
- Page 15 PACKED PACKED DESCRIPTION DRAWING DESCRIPTION DRAWING IN BOX IN BOX 08-168-12 08-187-12 BOLT WASHER 08-193-12 08-189-12 PLASTIC ACORN NUT PLUG 08-195 08-196 (47”x47 ½”) (46 ¼”x43”) BOTTOM ROOF BOTTOM CORNER ROOF LEFT PANEL PANEL 08-198 08-197 (46 ¼”x43”) (24 ¼”x42 ½”) BOTTOM TOP RIGHT ROOF RIGHT...
-
Page 16: Available Replacement Parts
AVAILABLE REPLACEMENT PARTS DESCRIPTION DRAWING DESCRIPTION DRAWING 11-572-12 08-219-12 BOTTOM PVC WINDOW PLASTIC PANEL (in frame) (for wall panels) 10-493 11-822-12 PVC WINDOW BOTTOM (replacement PLASTIC PANEL material only) 85-417-P 15-097-12 ROUND SPLINE DOOR WHEEL FOR PVC ASSEMBLY WINDOW 11-736-12 15-123-12 RECEIVER PIN FOR PVC... - Page 17 Note: The dimensions are approximate. ZZZ-183.41215-12.0324-22.GP.EN TAP-OO 17...
Need help?
Do you have a question about the 41215-12 SAND and is the answer not in the manual?
Questions and answers