Other Opengl Options; Multi-Display Hardware Acceleration; Figure 9.19 Opengl Settings: Nview Span/Clone Mode Hardware Acceleration - Nvidia P128 - Quadro FX2000 Dual Graphic Card 8x 128MB Model OEM User Manual

C h a p t e r 9
• Maximize texture memory: Enabling this option sets aside as much
memory as possible for use by texture maps. This can increase performance
for highly texture-intensive applications but at the expense of a minor
amount of performance for non-textured applications

Other OpenGL Options

Multi-Display Hardware Acceleration

Note: Multi-display hardware acceleration options do not apply when using
This option determines advanced rendering options when using multiple
displays and/or different classes of NVIDIA GPUs.
• Single-Display Mode: If you have only one active display, this is the default
setting
with the multi-device modes.
• nView Clone/Span Mode: This is the default setting when your nView
display configuration is set to nView Clone mode or nView Span mode. If
multiple NVIDIA-GPU based graphics cards in your system are in use with
active displays, this setting is replaced by one of the "Multi-Device" modes
described below
Figure 9.19
127
nView Multiview mode in Windows NT 4.0.
(Figure 9.18). You can also specify this setting if you have problems
(Figure
OpenGL Settings: nView Span/Clone Mode Hardware Acceleration
A d d i t i o n a l F e a t u r e s a n d E n h a n c e m e n t s
9.19).
Default
nView Span/
Clone Mode
option for
nView Span
or Clone
modes
N V I D I A C o r p o r a t i o n