Monitor Settings (Refresh Frequency); Secondary Display - Nvidia P128 - Quadro FX2000 Dual Graphic Card 8x 128MB Model OEM User Manual

C h a p t e r 8
Note: The Use monitor scaling option is available for flat panels that support
Monitor Settings (Refresh Frequency): Secondary
Display
Note: The Monitor Settings option only appears for the secondary display
Follow these steps to modify the Refresh Frequency of your secondary display
device:
Note: If you are in the nView Display Mode panel, right click the Digital Flat
Make sure you are in the Device Selection panel.
1
Confirm that the Digital Flat Panel option is selected on the Device
2
Selection panel.
Click Device Adjustments to access the Flat Panel Display panel.
3
Click Monitor Settings to open the Monitor Settings panel
4
Note: The Monitor Settings panel in
The Refresh Frequency list box lists the refresh rates available for this
monitor. You may select a different refresh rate than the one that appears in
the list box. A higher refresh frequency reduces flicker on your screen.
Note: It is recommend that you keep the Hide modes that this monitor
101
multiple native resolutions.
device (Display 2), if the secondary device is a digital display or CRT
(analog display). In this example, the secondary display device is a digital
display.
Panel icon and select Screen Adjustment to display the Flat Panel
Display panel, click Monitor Settings to open the Monitor Settings
panel, then go directly to step. 4 below.
panel for your primary display (Properties > Settings > Advanced >
Monitor tab) but actually represents your secondary display.
cannot display option checked. Unchecking the option will allow you
to set your display to modes that this monitor cannot display correctly,
which may lead to an unusable display an/or damaged hardware. Also,
unchecking this option will prevent enabling nView Span modes.
D e v i c e S e l e c t i o n A n d C o n f i g u r a t i o n
Figure 8.21 "resembles" the Monitor
N V I D I A C o r p o r a t i o n
(Figure 8.21).