Enabling Nview Span/Clone Modes; Enabling Nview Span/Clone Modes: Windows 2000 - Nvidia P128 - Quadro FX2000 Dual Graphic Card 8x 128MB Model OEM User Manual

N V I D I A D i s p l a y P r o p e r t i e s R e l e a s e 4 0
are using an NVIDIA GPU-based card to which you have connected four
displays, you can have two sets of two spanned displays.

Enabling nView Span/Clone Modes

Enabling nView Span/Clone Modes: Windows 2000

Note: Under Windows 2000, switching between nView Span/Clone and
To disable Dualview mode and, therefore, make nView Span and Clone modes
accessible, follow these steps:
Click Properties > Settings tab.
1
Be sure to click the display image 1 so that it is the selected display.
2
Click Advanced to display the NVIDIA GPU tab.
3
Click the NVIDIA GPU tab and then the Desktop Utilities option from the
4
Media Center menu.
Click to uncheck the option Enable Dualview (Treat multiple outputs . . . ).
5
Click Apply and restart your computer.
6
After the system starts up, if the NVIDIA nView Desktop Manager Setup
Wizard appears, run through the Wizard. (See the NVIDIA nView Desktop
Manager 2.0 User's Guide for details.)
Right click to display the properties menu, then select Properties > Settings
7
tab.
When you are in Windows 2000 (non-Dualview) nView Span or Clone
mode, your Windows Display Properties Settings panel shows only one
monitor image
Click Advanced to display the NVIDIA GPU tab
8
Click the NVIDIA GPU tab. The Media Center menu appears
9
Click nView Display Mode to display the associated properties panel with
10
the Span and Clone mode options available.
N V I D I A C o r p o r a t i o n
Dualview modes requires restarting your computer.
(Figure 5.22).
U s e r ' s G u i d e
(Figure 5.23).
(Figure
(Figure 5.25).
5.24).
54