Enabling Nview Clone Mode: Windows 9X; Figure 5.29 Nview Clone/Span Modes Available: Windows Xp (2000) - Nvidia P128 - Quadro FX2000 Dual Graphic Card 8x 128MB Model OEM User Manual

C h a p t e r 5
Figure 5.29

Enabling nView Clone Mode: Windows 9x

Note: Under Windows 9x, Clone mode is available. Also, you do not need to
When you are in Windows 9x Clone mode, your Windows Display Properties
Settings panel shows at least "two" monitor images, which indicates that you
are in Dualview mode.
To disable Dualview mode and, therefore, make nView Clone mode
accessible, follow these steps:
Open the Windows Display Properties Settings panel.
1
Right click on the monitor image number 2 and click Enabled so that the
2
option becomes unchecked and click Apply
secondary display. (To access nView Span and Clone modes, only one
monitor needs to be enabled on the Display Settings panel.)
Be sure to click the display image 1 so that it is the selected display.
3
Click Advanced to display the NVIDIA GPU tab shown in
4
Click the NVIDIA GPU tab to display the Media Center menu
5
59
U s i n g n V i e w M u l t i - D i s p l a y M o d e s : D u a l v i e w v s . S p a n / C l o n e
nView Clone/Span Modes Available: Windows XP (2000)
restart your computer to switch between nView Clone mode and
Dualview mode.
.
(Figure
nView Span and
Clone modes
are available
when Dualview
mode is disabled. .
.
5.30). This turns off your
Figure 5.31.
(Figure 5.32)
N V I D I A C o r p o r a t i o n