Nvidia P128 - Quadro FX2000 Dual Graphic Card 8x 128MB Model OEM User Manual page 18

C h a p t e r 1
From your Windows desktop, right click to display the pop-up menu and
1
click Properties > the Settings tab and then Advanced. You will see the
name of your NVIDIA GPU on a tab
Click the NVIDIA GPU tab, which displays the name of the NVIDIA GPU-
2
based graphics card that is installed on your computer.
The NVIDIA Media Center menu appears
this menu, you can access all the NVIDIA properties panels where you can
configure the following NVIDIA Display Driver features.
•
•
•
•
•
•
•
•
•
•
Click the green button on the Media Center menu to toggle between hiding/
3
displaying the Media Center menu, as shown in
1.6.
8
nView Display (Span/Clone) Mode options are available when Dualview
is disabled, as shown in
Color Correction and Device Selection panels.
Device Selection. This option appears when Dualview mode is enabled, as
shown in Figure 1.3. When Dualview mode is disabled (nView Span/
Clone mode enabled), this option doesn't appear because it is accessible
from the nView Display Mode panel.
Performance and Quality Settings
Direct3D Settings
Refresh Rate Overrides
OpenGL Settings
Overlay Controls
Desktop Utilities
NVRotate
Temperature Settings (available only with the GeForce FX GPU and
only if the feature is enabled on GPUs that are older than the GeForce GX)
(Figure 1.1).
(Figure 1.2
Figure 1.2. In this case, you can also access the
I n t r o d u c t i o n
and Figure 1.3). From
Figure 1.4 through Figure
N V I D I A C o r p o r a t i o n