N V I D I A D i s p l a y P r o p e r i t e s
Change Format: Regional Settings
From the Device Selection panel, click Change Format to access the Regional
Settings
list that appears allows you to select the TV output format based on the country
where you live.
Figure 8.23
Note: If your country is not in the list, select the country closest to your
Device Adjustments: TV Output
From the Device Selection panel, click Device Adjustments to open the TV
Output panel
display.
Note: Be sure to click Apply after you make any changes in order for the
Support of TV adjustment features described in this section depend on the TV
encoder you are using.
features they support. The first four categories of TV encoders are supported by
N V I D I A C o r p o r a t i o n
(Figure
8.23) where you can specify a particular TV output format. The
Change TV Format: TV Regional Settings
location.
(Figure
8.24) where you can customize the settings for your TV
changes to take effect.
Table 8.1
lists TV encoders and the TV adjustment
U s e r ' s G u i d e
104