Figure 5.12 Windows Xp Display Settings In Dualview Mode - Nvidia P128 - Quadro FX2000 Dual Graphic Card 8x 128MB Model OEM User Manual

N V I D I A D i s p l a y P r o p e r t i e s R e l e a s e 4 0
Confirm that all your display devices are securely connected to your
2
computer and turned on!
Confirm that the NVIDIA Display Driver software (including the nView
3
Desktop Manager component) has been installed on your system.
Start Windows.
4
From your desktop, right click to open the properties menu, then click
5
Properties and the Settings (tab). You'll notice that two monitor images
appear on the Settings panel, indicating that you are in Dualview mode.
Figure 5.12
Now right click the monitor image that you need to attach. A pop-up
6
properties menu appears.
Note: You may not need to do the next step if the secondary display device is
Click Attached and Apply.
7
You will notice that the Extend my Windows desktop onto this monitor
option becomes checked and your secondary display device is enabled.
Click Advanced. The NVIDIA GPU tab appears
8
N V I D I A C o r p o r a t i o n
Windows XP Display Settings in Dualview Mode
already attached.
U s e r ' s G u i d e
(Figure 5.14).
46