N V I D I A D i s p l a y P r o p e r i t e s
Display Timing
If your NVIDIA GPU-based graphics card is connected to a CRT (Analog
Display), follow these steps to access the Display Timing panel:
Note: If you are in the nView Display Mode panel, right click the monitor
Make sure you are in the Device Selection panel.
1
Confirm that the Analog Display option is selected on the Device Selection
2
panel.
Click Device Adjustments then click the Display Timing tab to open the
3
Display Timing panel.
Figure 8.17
Select the proper timing mode for your display:
4
•
•
N V I D I A C o r p o r a t i o n
image to display the pop-up menu and select Screen Adjustment to
display the Screen Adjustment panel. Then click the Display Timing tab
to open the Display Timing panel and go directly to step. 4 below.
Display Timing Settings: Analog Display
Auto-Detect (default setting) allows Windows to receive the proper
timing information directly from the monitor itself.
Note: Some older monitors may not support this feature.
General Timing Formula (GTF) is a standard used by most newer
hardware.
U s e r ' s G u i d e
98