TJM SEEKER 033LIGHTRND180G2 Product Instructions & Specifications

180mm led driving lights

Download this manual

WIRING

WIRING STEPS

LIGHT ADJUSTMENT

WARRANTY

For product warranty please refer to our website www.tjm.com.au

Distributed by TJM Pty Ltd

17 Johnstone Rd Brendale Australia 4500

Telephone

(07) 3865 9999

Facsimile

(07) 3865 3677

www.tjm.com.au

NUTS

SPRING WASHERS

NUTS

033WIREHARNUNI.

Install a wire from pin 87 of the relay to the white wire

of the driving lamps.

Issue 2 27.01.2022

TJM SEEKER SERIES

GENERATION 2

180MM LED DRIVING LIGHTS

INSTRUCTIONS & SPECIFICATIONS

PLEASE READ THIS MANUAL CAREFULLY BEFORE USING AND RETAIN FOR FUTURE REFERENCE

PN. 033LIGHTRND180G2

Need help?

Do you have a question about the SEEKER 033LIGHTRND180G2 and is the answer not in the manual?

Page 1 Install a wire from pin 87 of the relay to the white wire of the driving lamps. LIGHT ADJUSTMENT WARRANTY For product warranty please refer to our website www.tjm.com.au Distributed by TJM Pty Ltd 17 Johnstone Rd Brendale Australia 4500 Telephone...
Page 2 TJM recommend that all three mounting locations are used to fasten the Seeker Series lamps to a suitable surface. It is recommended to drill additio nal hole locations where required. Drilled holes must be treated with rust prevention on steel 033WIREHARNUNI.