Step 3-3: Heat Sink Installation; Step 3-4: Memory Installation - Gigabyte GS-R114V System Installation Manual

1u rack mount server

Table of Contents

GS-R114V Rack Mount Server

Step 3-3: Heat Sink Installation

Step 1 Place the Heat Sink on the CPU. Before putting the heat sink on the CPU, please well

remember to apply the thermal conductivity compound on the CPU.

Step 2 Seat the heat sink in the retention modules with the four screws. Installation completed.

1. Unlock a DIMM socket by pressing the retaining clips outwards.

2. Aling a DIMM on the socket such that the notch on the DIMM exactly match the notches in the

socket.

3. Firmly insert the DIMMinto the socket until the retaining clips snap back in place.

4. When installing the DIMM into the DIMM socket, we recommend to populate one DIMM in

Channel A module and one in Channel B module for best performance.

Please note that each logical DIMM must be made of two identical DIMMs having the same

device size on each and the same DIMM size.

5. Reverse the installation steps when you wish to remove the DIMM module.

Step 2

Step 1

1 4

Retaining Clip

Table of Contents