Step 2-3: Heat Sink Installation; Step 2-4: Memory Installation - Gigabyte GS-SR195H System Installation Manual

1u rack mount server

Table of Contents

GS-SR195H Rack Mount Server

Step 2-3: Heat Sink Installation

Step 1 Place the Heat Sink on the CPU. Before putting the heat sink on the CPU, please well

remember to apply the thermal conductivity compound on the CPU.

Step 2 Seat the heat sink with the four screws. Installation completed.

Step 1

1. The DIMM slot has a notch, so the DIMM memory module can only fit in one direction.

2. Insert the DIMM memory module vertically into the DIMM slot. Then push it down.

3. Close the plastic clip at both edges of theDIMM slots to lock the DIMM module.

4. DIMM must be populated in order starting at the farthest slot from the MCH chipset.

Each logical DIMM must be made of two identical DIMMs having the same device size on

each and the same DIMM size.

5. Reverse the installation steps when you wish to remove the DIMM module.

For detail DIMM Population, please refer to section 4-2: DDR DIMM Slot Population

Step 2

Step 1

1 4

Table of Contents